pintofguinness
محتوياتي
كل الرسائل
استعراضات
تعليقات
أجابات
الأسئلة

كل الرسائل

pintofguinness 09/11/2023
Good fasteners. Price is really ok. I'm very happy. I tough that they are not so good because of the price but I was wrong. They are good.
40 جهازًا من دبابيس الدفع ريفيت للحواجز والحوافظ والملقطات السريعة للدواسات الواقية من الوحل
US$5.99 US$10.99
0
التوصيات
تعليقات (0)
pintofguinness 30/03/2023
Very good heater. Fuel consumption is exellent specially at partial power. Heat exchanger is very large it's area, much bigger than more expensive heaters. You can adjust the power very easily and I have not seen so easy use system any other heater. About the price, you can order two of these, another as spare parts. Still the price is good. I'm sure you already guess it, highly recommended this apparatus. My first use is Leaf EV extra heating system. Works well and not mix up the car heating automatic system. Driving distance is much more longer.
Hcalory 12V 8KW ديزل الهواء سيارة موقف سخان أسود LCD الترموستات مع التحكم عن بعد 10L خزان العوازل للشاحنة قارب الحافلات المنزلية
US$239.99 US$299.99
0
التوصيات
تعليقات (1)
pintofguinness 30/04/2023
Very usable heater. If you want separate stuff then just open the covers and that's it. Heating power adjustment straight from the display is very handy. For example Webasto is really difficult in this. Also aluminium fins inside of the unit are some 2,5 times bigger with in area than Webasto. Means better heat transfer and smaller fuel consumption. Spare parts are cheap and seems to me that these heaters working very well and long time. And must remember the price; you can buy two of these and use another as sparepart. It's still reasonable price. And the seller is really reliable based my several years shopping from BG. I didn't have time to measure heating power so far but there comes out impressive amount of heat so it's working really ok. I recommended this heater strongly.
HCalory 5KW 12V ديزل الهواء سيارة موقف سخان جميع في واحد مع التحكم عن بعد للسيارات الترفيهية المنزلية عربة شاحنة قارب
US$259.99 US$299.99
0
التوصيات
تعليقات (0)
pintofguinness 30/03/2023
One of the most easier to read displays I've ever seen. Price is excellent. I ordered this for spare part for my heater in case I needed in the future. Surpricingly the remote control includes the price. Hope I don't need it but....
تحكم وقوف السيارات مدفئ هواء ديزل زر شاشة ال سي دي مع جهاز التحكم عن بعد 4 أزرار
US$18.99 US$27.99
0
التوصيات
تعليقات (0)
pintofguinness 05/10/2022
Ezcellent product. Nozzle temp 225C is good, 80% cooling, 50C bed. Very easy to use and no bad things. Also it's quite strong. Strongly recomm this product.
SUNLU 1KG PETG-G الجديد المحسن بنسبة 1.75مم 100٪ من فيلم الفقاعات لطابعة ثلاثية الأبعاد
US$23.99 US$47.99
0
التوصيات
تعليقات (0)
pintofguinness 04/12/2021
As usual, quality is good and the price really ok. Tracking was accurate. Can not remember bad purchase from Banggood so the quality control must be good.
Creativity® 1.75 مم Extruder Hotend Kit بلوك تسخين ألمنيوم يناسب Ender 3/CR10/CR10S بفوهة 0.4 مم لطابعة ثلاثية الأبعاد
US$13.99 US$16.99
0
التوصيات
تعليقات (0)
pintofguinness 22/11/2021
Good quality filament. Easy to print and it's not too flexible so you can print like gaskets etc. Not collect moisture easily which is a good thing. Trying to find TPE from Banggood but no succees. Hope it will come sale soon.
SUNLU TPU 1.75 مللي متر خيوط 0.5 كجم 1 لفة 11 اللون خيوط عالية القوة متوفرة للطابعة ثلاثية الأبعاد
US$25.99 US$32.99
0
التوصيات
تعليقات (0)
pintofguinness 22/11/2021
Quality is good as usual. This "thing" can be use for many equipment like battery charger with cc charging, grid tie inverter feeding stable power etc. Voltage variation between in and out voltage is relatively small when input varies littlebit. Price is so good that there is no point to do these DIY. Good product. Elco's are quit near specs so maybe it's a good idea keep voltages at input max 35V and output under 30V. But it works 24V systems very well.
Geekcreit® DC 6-40V إلى 1.2-36V 300W 20A محول خفض بك الحالية المستمرة قابل للتعديل وحدة طراز
US$9.99
0
التوصيات
تعليقات (0)
المصباح الخلفي للفرامل والاضواء الخلفية لسيارة LED SMD 5050 الأبيض 24 1157 BAY15D
US$4.61 US$5.59

سؤال: Does it has two led segment for trail and stop light separately?

السؤال بواسطة Prayagchand على 2019-08-13 10:55:17

pintofguinness Yes.Must say that the brake light side is not so bright but if you have third brake light then ok. Poles of this bulb are connected right way.

2021-10-14 02:23:25 مساعدة (0)
عرض
أجابات (1)
1000 واط شبكة التعادل العاكس 230 فولت 115 فولت MPPT موجة جيبية نقية العاكس الكهروضوئية 50 هرتز / 60 هرتز
US$125.99 US$173.99

سؤال: does it work with 72cel 46.1v voc

السؤال بواسطة sollon على 2021-08-26 09:03:37

pintofguinness 45Vmax. It means that 11pcs LiFepO4 when max charging voltage is 3,8V per cell. If LiPo then max charging voltage 4,2V and 10 cells. Must say that I calculating these electronics for 40V max. Then there is no big surprices. Sorry the delay for answer, I just noticed question! Regards Pera

2021-10-14 02:21:25 مساعدة (0)
عرض
أجابات (1)
pintofguinness 06/08/2021
Product ok and everything ok. Price was good.
Trianglelab® / Dforce® MK8 فوهة نحاسية قطر 1.75 مم للأجهزة المؤقتة J-head Hotend cr10 heat block ender3 hotend خيط M6 لطابعة ثلاثية الأبعاد
US$2.39 US$3.99
0
التوصيات
تعليقات (0)
pintofguinness 14/07/2021
At last have installed this thing. It's ok and works well, measurements are ok. Material seems to be good.
قطعتان من مثبت غطاء المحرك لسيارة بيجو 106206306
US$6.99 US$8.99
0
التوصيات
تعليقات (0)
pintofguinness 10/06/2021
Very handy small thing. I using it to cut off charge at 60pcs LiFePO4 batteries, need 8pcs of these small things. It can be done by taking voltage out from the buzzers poles. Also, by using two of these at parallel you can put voltage littlebit lower and arrange shunting with relay and resistor. Very cheap and accurate BMS! Workmanship is great.
10 × 2 في 1 يبو بطارية الجهد المنخفض تستر 1S-8S الجرس إنذار
US$22.99 US$27.99
0
التوصيات
تعليقات (0)

pintofguinness Hi!Just an idea, maybe you can put just a small external load for the panels. Many times those need only small load and then voltage will getting littlebit lower. Regards Pera P.S. The date of your message is funny, 1969.

BG353854131 28/09/2020
Very fast delivery, arrived from CZ in just 3 working days (plus a weekend), thanks! Looks solid and well built. I still need to figure out how to drop my open circuit voltage of 49 volts of a 72-cell solar panel to below inverter's upper limit of 45 V, which is a bit on the low side. Currently it tries to start (green LED on for few seconds) but then fails with a red light, probably due to its overvoltage protection.
1000 واط شبكة التعادل العاكس 230 فولت 115 فولت MPPT موجة جيبية نقية العاكس الكهروضوئية 50 هرتز / 60 هرتز
US$125.99 US$173.99
3
تعليقات (1)
pintofguinness 13/05/2021
I haven't tested the strings but other items are really ok. Tuning meter is very clear and also accurate. I'm happy about this buy. Only thing what I was done was changing capo's spring for littlebit lighter. Then it's ok for nylon strings. Easy to do.
مجموعة أدوات تغيير أوتار الجيتار أدوات صيانة العزف على الجيتار للمبتدئين
US$13.99 US$16.99
0
التوصيات
تعليقات (0)
pintofguinness 13/05/2021
Works perfectly. Incredible price/quality.
W1308H شاشة دجيتال لتحكم درجة الحرارة بواسطة ميكروكمبيوتر مع وقت ذكي يعمل على تعديل درجة الحرارة وتحديد درجة الحرارة 12V / 24V / 220V
US$9.99 US$11.99
0
التوصيات
تعليقات (0)

pintofguinness Thanksfrom the good review!

Joepe 27/03/2018
Great looking machine that went together with ease after reviewing a few youtube videos. X-axis was over tightened and y axis was a little loos otherwise I didn’t do any adjustments. Bed was slightly uneven making it a bit diffucult leveling the bed for a beginner like me. I was quite unhappy though when I realized the controller unit was dead when I plugged in the power. However after removing the cover of the controller I quickly found one of the power connectors coming loos in transport. I reattached it and tightened the other connectors as well and then it started working. Printed directly on the glass with some gluestick applied. Initially had issues with the PLA coming loose but after lowering the fan speed (50%) and making the bed slightly hotter (56 degree) it worked fine. I was printing in my cellar with a ambient room temp of ~17 degrees C so it was too cool with the defaults is my take on it. The cat came out nice with some minor artefacts most likely related to temperature tuning but overall quite impressive.
Creality 3D® CR-10 Mini DIY 3D Printer Kit 300 * 220 * 300mm حجم الطباعة الدعم استئناف الطباعة
US$339.72 US$427.79
0
تعليقات (1)

pintofguinness Hi!I really like your rewiev, t'was very pro and useful. Thanks!

Transparent 08/01/2018
I purchased this as my first 3D printer after selecting it by watching YouTube reviews. It arrived well-packed, and requiring little assembly work. However, I feel that the written instructions are not comprehensive enough. The best guide to initial set-up and testing I found in this 11min video: https://www.youtube.com/watch?v=Cdkb_ILCptw All the tools required are provided. I was surprised that the fine nozzle-cleaner was loose in the box, and I nearly threw it away by mistake. The photos show the test-piece being printed from the SD-card supplied. Note the four corner-squares of masking tape, which I used to set the clearance between the hot-bed and the nozzle once I'd disabled the stepper motors. There is very little clearance-gap between the z-axis lead-screw and the filament incoming to the extruder. I loosened the four bolts for the extruder stepper, and twisted it clockwise whilst I re-tightened them in order to make this gap as large as possible. I might change this arrangement by making a bracket to hold the filament slightly further away. The larger picture shows my supply of PLA reels in 19-ltr Really-Useful boxes on the shelf above. Each box contains a large container of deliquescent crystals to lower humidity. Although the motor noise is bearable, I aim to build a polycarbonate enclosure around my printer. This will also help keep the ambient temperature high enough to print ABS.
Creality 3D® CR-10 Mini DIY 3D Printer Kit 300 * 220 * 300mm حجم الطباعة الدعم استئناف الطباعة
US$339.72 US$427.79
11
تعليقات (1)
pintofguinness 24/02/2021
This microphone is very good. Frequency curve as showed and distorsion very low. This microphone takes sound from the side where marked it's type, so not in the top as scribed in the photos. It needs phantom power as it's condenser microphone. I like to use it stand alone so maybe I build up inside of it some 9V battery, one 10kohm resistor and elco condensator 10uF/63V plus small switch side of it. Must mentioned that there is inside of it pc board which do corrections for frequency curve. Incredible for this price! Highly recomm it for recordings etc.
ميكروفون بمكثف أساسي من باكي BM-800 ميكروفون تسجيل استوديو قلبي الشكل مع كابل XLR مثبت للصدمات
US$27.99 US$33.99
1
التوصيات
تعليقات (0)

أنت الخبير ، هل يمكنك المساعدة؟

ندعوك بصدق للاشتراك في البريد الإلكتروني Invite Answer!

إذا قمت بالاشتراك ، فسندعوك عبر البريد الإلكتروني للإجابة على الأسئلة التي يطرحها الأشخاص حول المنتجات. باشتراكك] سوف تكسب أيضًا "شارة مفيدة "! يمكنك إلغاء الاشتراك في أي وقت على صفحة إعدادات الخصوصية.

ساعد الآخرين وكن أكثر سعادة!

  • الإشتراك

حول الشارات

ترتبط الشارات بالمجتمع ، ويكسب المستخدمون شارات عن طريق إنشاء محتوى عالي الجودة ، أو إكمال المهام ، أو عن طريق المشاركة في أنشطة خاصة. وسيكون للأشخاص المعنيين أيضًا شارة خاصة بهم.
شارة الرئيس التنفيذي

شارة المدير التنفيذي مملوكة فقط من قبل رئيس شركة بانجوود.

شارات يمكنك كسب قريبا
  • حسنا

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • حسنا

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe