كل الرسائل

fuiru Thanksfor the detailed comment! I had not realized that the connector wasn't using the typical Grove pinout. Luckily, I came here to check the sensor types before plugging anything in. I was able to rearrange the pins inside the connector on one side, so that the colors match and one can plug the other end into a standard Grove I2C port. I've marked the connector, so that hopefully I'll remember that it's no longer a straight cable.

BG451141513 08/12/2021
2
تعليقات (4)

سؤال: How many steps per revolution?

السؤال بواسطة fuiru على 2019-12-26 10:14:04

Anorchous 18 degree

2019-12-27 12:49:33 مساعدة (1)
عرض
أجابات (1)

سؤال: What is the JTAG Connector Pitch? (2mm, 2.54mm or less?)

السؤال بواسطة dimikan على 2019-03-07 03:45:59

fuiru The pitch is 1.27mm

2019-07-30 02:52:10 مساعدة (0)
عرض
أجابات (2)

fuiru I no longer have the packaging and shipping label. Photos of the product don't help either. I'm just trying to help other customers fix the problem with the HX711 PCB included in this bundle. You can verify if the HX711 board has a problem by using a multimeter to measure the resistance between GND and E-. Those should be connected (see HX711 datasheet). The other board on Banggood (p1039638) is designed well and has this connection.

fuiru 01/08/2018
11
تعليقات (3)
fuiru 25/01/2018
14
التوصيات
تعليقات (3)

fuiru I have the same issue. The LED that's attached to the TP5410's pin 2 (the one further away from the USB connector) is the charge LED, which is supposed to be red. However, mine is green. I'll submit a separate review with picture.

pascu 28/08/2017
1
تعليقات (2)