كل الرسائل

FlyingSandal I had this issue too, you have to start your takeoff roll with full up elevator, ease throttle gradually, let the tail come up slightly while continuing to gain speed and finally apply full up elevator again to get off the ground and ease off elevator as soon as it's off the ground to avoid a stall and keep on climbing slowly. you need to practice to get this down. not the easiest to take off.

2021-10-15 01:19:11 مساعدة (0)
عرض
أجابات (4)

سؤال: What kind of batteries is needed for the model without camera.Thanks

السؤال بواسطة Shuka على 2019-09-04 06:27:52

FlyingSandal i fly mine with 5000 mAh 4S battery, lined up with the front of the battery tray and it balances well

2021-10-15 01:14:32 مساعدة (0)
عرض
أجابات (1)

سؤال: How do you connect servos using PWM? The 8 pads down the side plus 5V and 0V?

السؤال بواسطة JayGeeBSE على 2020-07-30 06:05:49

FlyingSandal connect all to the same ground and all to the same voltage. the signals of each channel to each servo. done

2020-07-30 09:04:35 مساعدة (0)
عرض
أجابات (4)

سؤال: is this compatible with r9m module?

السؤال بواسطة marceldovat على 2020-05-13 07:34:23

FlyingSandal no, you need an r9 receiver

2020-05-14 07:05:19 مساعدة (0)
عرض
أجابات (4)

سؤال: can you update the VTX harness to include smart audio please!

السؤال بواسطة FlyingSandal على 2020-04-11 09:38:36

CarpolQuirky helpful

2020-05-06 02:34:32 مساعدة (0)
عرض
أجابات (1)

سؤال: so should i take this one with my nazgul5 and my qx7 or the xm and most important: why?

السؤال بواسطة pottermoreschnabl على 2020-01-27 10:32:48

FlyingSandal Agree as well! Its super small, and you get full telemetry and full range. This is my go-to quad receiver.

2020-01-27 10:44:46 مساعدة (1)
عرض
أجابات (7)

سؤال: Does this also fit the 900 mm AR Wing? If not, where can I find hardware for that?

السؤال بواسطة FlyingSandal على 2019-11-10 12:38:47

wangxifen This item is not suitable for 900mm AR wing, the hardware for 900mm AR wing is not available.

2019-12-01 09:38:00 مساعدة (0)
عرض
أجابات (1)