كل الرسائل

سؤال: wil GNB27 connector battery work with this?

السؤال بواسطة MarkMontreal على 2021-09-16 10:09:04

MASH That connection will work and I had two LiPo 1s 270 in the set with exactly this type. I can be a bit fidly to get them apart but that will disappear over time. I changed my port to BT2.0 with 1s 300 as I had those already. Flight time increases to 4-5 Min.

2021-09-17 12:53:51 مساعدة (1)
عرض
أجابات (6)

squireld once your connected to betaflight in the tip left hand corner it will tell you your flight controllers target firmware.

2021-09-08 05:18:36 مساعدة (0)
عرض
أجابات (1)

MASH Concerningthe connection with BF and almost any FC it can be problematic. I use an MacBook Air with a USB-C Dongle to USB-A and a 1m cable. It works but BF keeps collapsing. Try to toggle between /dev/cu-usbmodem and /dev/tty-usbmodem and reduce the speed to 38.4 in the top menue. For that works with the Flyfox and other copter as well

ArthurTorricer88 18/08/2021
0
تعليقات (3)

سؤال: Can the motors resist to crashes? I think this will be a money pit. A bit like the tyro79 cheese motors.

السؤال بواسطة tsangbou على 2021-06-15 10:13:06

MASH Would say yes. I have tested it inside and due to the lower voltage the motor will survive. It will far more damage the carbon frame when it comes down too hard..

2021-09-07 02:51:34 مساعدة (0)
عرض
أجابات (4)

MASH Moin. Die richtige Antwort ist "JA". Ich hatte selbige Herausforderung mit einem TBD XF Nano. Die Pads befinden sich auf der Rückseite zur RunCam hin. Dort Linke & Mitte Brücken und es geht. Meine Tango2 Befehle sind jetzt in BF zu sehen. Guten Flug!

2021-09-03 08:47:34 مساعدة (1)
عرض
أجابات (3)

سؤال: Does this work the ender 3 v2 and ender 5 pro units?

السؤال بواسطة Databites على 2020-12-30 03:28:21

MASH Thenewer version of Ender3 V2 already has silent drivers. Can't judge on Ender 5 but I believe the Pro Version has it also implemented. It just makes sense with older versions

2021-01-02 10:23:23 مساعدة (0)
عرض
أجابات (3)

سؤال: Are you able to see or feel the humidifier working? My tank remains filled ...

السؤال بواسطة MASH على 2019-06-29 11:47:23

jiangrong8 Of course you can see or feel the humidifier working if you have followed the instructions. You should turn on the fan by long press to the fan image and then you can turn on the humidifier by long press to the light image.

2019-07-01 04:45:45 مساعدة (1)
عرض
أجابات (2)

سؤال: What acessories come with the smartphone?

السؤال بواسطة fabasttos على 2019-06-30 11:40:43

MASH USB-CCharger and cable, SIM card tool and a protection case

2019-07-01 04:06:14 مساعدة (0)
عرض
أجابات (1)

سؤال: Does it also work as a normal fan, in case you don't fill it up with water?

السؤال بواسطة kevinmelendez على 2019-06-14 04:42:02

MASH Yes. You have the choice of 3 different fan speed level.

2019-06-29 11:53:12 مساعدة (1)
عرض
أجابات (4)

سؤال: What is the capacity of the water container?

السؤال بواسطة Kate على 2019-05-24 08:06:57

MASH There is a little bottle included to fill the tank below the unit. It is described for 45 min then the fan stops humidification automaticly

2019-06-29 11:51:47 مساعدة (0)
عرض
أجابات (7)