أفضل العروض لـ وحدة واي فاي,شاشة العرض السائلة

oldhui 24/02/2020

I am the one who asked if the SSID and WiFi password can be changed on this product. I can confirm that it is possible to change. (Otherwise this product is useless if the password is fixed as everyone can connect to your drone.) To connect to Pixhawk, you need to set your telemetry port to a baud rate of 912600. I cannot initiate the terminal/CLI in Mission Planner. However, if you go to the full parameter list/tree, you can find it under SERIAL. Depending on you are using telemetry port 1 or 2, you can set the port to use MAVLINK with the correct baud rate. The module comes with a default SSID and wifi password. Once you are connected to the access point, use a browser to browse the URL 192.168.4.1. You will see a web page. From here you can change the SSID and wifi password. Be warned: The default firmware text is in simplfied Chinese. You can also flash the firmware here. It is actually using the ESP8266 Mavlink wifi bridge firmware version 1.2.2. You can get the 1.2.2 firmware bin file from Github. Once flashed, the default SSID is PixRacer, wifi password "pixracer". All functions are the same.

جسر MAVLink Wifi 2.4G لاسلكي Wifi وحدة تليمتري مع هوائي لتحكم رحلة Pixhawk APM

8,18€ 16,60€

3

تعليقات (0)

oldhui 29/10/2020

Magnet strength is ok. If you use it with a stiffer cable it may disconnect. On a MacBook Pro, HDMI via this adaptor is unstable. It working for a while and then it disconnects. It could be related to stiff cable of the USB-HDMI adaptor I use as it may pull it off. It is annoying as swithing between display takes a while. I will only use this for charging. It seems fine for this purpose alone.

مغناطيسي USB C محول 20 دبابيس Type C موصل PD 100W سريع شحن 10Gbp / s

22,13€ 26,75€

0

تعليقات (1)

oldhui 02/09/2020

Item received very quickly. Connectors are correct and there is no need to reverse them. Need to print case and mount for the Anycubic Linear Plus but there are many models available in Thingiverse. The cable openings on the back may not fit though. I didn't check before printing and need to do some post-processing. It is better to check and edit the models before printing. Configuring Marlin 1.1.8 (waiting for SKR 1.4 Turbo for Marlin 2.0) is quite straight-forward: Just enable display as REPRAP_DISCOUNT_FULL_GAPHIC_SMART_CONTROLLER in Configuration.h. I also disabled MENU_HOLLOW_FRAME in Configuration_adv.h for inverted menu selection, which looks better than just 2 horizontal bars.

وحدة تحكم طابعة ثلاثية الأبعاد ذكية تعمل بواجهة العرض السائلة 12864 والمعروفة بـ RAMPS 1.4 Reprap

12,61€ 22,13€

0

تعليقات (0)

جسر MAVLink Wifi 2.4G لاسلكي Wifi وحدة تليمتري مع هوائي لتحكم رحلة Pixhawk APM

8,18€ 16,60€

سؤال: Can the SSID and password be changed? Otherwise everyone can connect and take over control of your drone.

السؤال بواسطة oldhui على 2020-01-22 07:44:00

Invi no

2020-02-12 01:47:03 مساعدة

عرض

أجابات (1)

oldhui 07/01/2019

These rings are very useful if you need to convert between dfferent filter sizes. In my case I use it to connect my lenses to a reverse mount adaptor. If the sizes are too far apart you may not want to stack too many adapters together. I tried all rings and the threads are all good.

9X Step Up 37-82 ملم + 9X Step Down 82-37 مم حلقات محول فلتر الخطوة

13,83€ 16,60€

0

تعليقات (0)

oldhui 03/01/2019

This works with the Broadlink RM Pro control unit. *** Note that I do not use it with Broadlink's Android/iOS app. *** Instead, I use RM Bridge, IFTTT and link it with Google Home. Technically speaking you should be able to use Broadlink's app to learn its RF code but I haven't tried. And Broadlink's integration with Google Home is hopeless. So far it works better than Broadlink's own TC2 light switch which is super unreliable. The only downside of this unit is that the plastic seems to be not of the same quality as Broadlink's. Otherwise it is much more reliable (so far). BTW, the light shows 2 colours, which is quite good. In the off state, the light is blue. In the on state, the light turns red.

SESOO SY6-01-X الاتحاد الأوروبي / المملكة المتحدة القياسية الذكية اللمس التبديل RF433 التحكم عن الجدار التبديل 1 عصابة 1 طريقة لاسلكية ضوء مفاتيح ل سم

15,67€ 21,21€

0

تعليقات (0)

oldhui 07/07/2018

I used this to upgrade my Anycubic Linear Plus to auto-leveling. It is more handy than manually doing the job. Manual leveling is tedious and time-consuming but I can get an almost perfect first layer. Using this kit alone (+ the newest firmware) doesn't get as good a result. At the end of the auto-leveling process I still need to manually adjust the 3 endstop screws to get a sticking first layer. However, the process is much faster than manual leveling. One star off for Anycubic giving too sort a lead. It may be long enough for the non-Plus. For the Plus model I need to make an extension. Giving that it is basically a microswitch with a lead, you can most likely DIY or 3D-print it. However, the whole package is quite neat with the magnetic attachment. BTW, the newest Cura (3.4?) just cannot upload the firmware but hangs. I tried this many times on 2 PCs and they all hung. I need to use the old Cura (15.04.6) to upload it. This is what Anycubic shows in their Youtube video.

Anycubic® 6-38V Auto Leveling المستشعر خاصية تسخين السرير المستشعر لطابعة Kossel Series ثلاثية الأبعاد

17,52€ 23,05€

0

تعليقات (0)

لوحة تحكم Eachine Beecore F3_EVO_Brushed لطائرة إنديكتركس تايني ووب إيتشين E010 E010S

23,98€ 32,28€

سؤال: Where is the 5V connection for the camera? I cannot find it from the photos.

السؤال بواسطة oldhui على 2017-11-13 06:08:14

Elaine Dear customer, maybe you can see this video, hope it can help you. https://youtu.be/E_hp9-patkQ

2017-11-28 03:45:56 مساعدة

عرض

أجابات (1)

مرحبًا بكم في Banggood ،

أنت تسمح لـ:

كل الرسائل

أنت الخبير ، هل يمكنك المساعدة؟

حول الشارات

About Badges

Helpful Badges

Are you ready to help?