Philiski the maximum camera resolution is 640x480 at 25-30 frames per second. The picture provided by this camera is very clear at that resolution. I use it to zoom in on circuit boards and SMD chips and it works well.

Philiski unfortunately mine did come assembled already.

Philiski the amplifier will require a 12v-0-12v center tap transformer with a minimum of 2amps to operate affectionately. hopefully this will help you. if you need any further assistance please let me know.

Philiski it comes with a premolded 5.5mm connector. that is usually the standard for 12v. in order to use the panel with a 5v female connector. you will need to use a 12v female to 5v male adapter.. the 5v male will measure 2.5mm. hope you have found this helpful. if you need further assistance, pleas feel free to ask.

Philiski I'm not sure I understand your question ⁉️. can you try and rephrase it?

Philiski the fuse holder is recommended for use with a max 10-15 amp fuse. I would not try placing a 20 amp fuse in the holder. it can case damage. hope you find this helpful.

Philiski it comes with a list of components and a numbered board. you can check off what you install as you go along. it also has a paper schematic. hope you find this helpful.

Philiski I didn't use any glue on mine. pieces fit together enough but can be tricky to do. crazy glue is usually the glue of choice. make sure you have the correct pieces in the correct place before glueing any. hope you find this helpful.