this a nice addition to the 1/35 Ford, but no mounting instructions are to be found. i tore up two tires before i figured it out , so you dont do the same , this is how you mount the rings. 1.Remove the foams and wheels from the tires. 2.press the wheel into the weight ring, so its flush with one side and the hole for the bead on the other side is exposed. 3.gently push the bead of the tire into the hole of the exposed bead. 4. once the bead is int turn the wheel around and push the wheel down , so the exposed bead hole locks in and exposes the bead hole on the other side. 5. gently push the bead of the tire into the hole of the exposed bead. 6. push the wheel down just a bit so its centred with the ring and the beads of the tire are locked into place Hope this helps someone .

this a nice addition to the 1/35 Ford, but no mounting instructions are to be found. i tore up two tires before i figured it out , so you dont do the same , this is how you mount the rings. 1.Remove the foams and wheels from the tires. 2.press the wheel into the weight ring, so its flush with one side and the hole for the bead on the other side is exposed. 3.gently push the bead of the tire into the hole of the exposed bead. 4. once the bead is int turn the wheel around and push the wheel down , so the exposed bead hole locks in and exposes the bead hole on the other side. 5. gently push the bead of the tire into the hole of the exposed bead. 6. push the wheel down just a bit so its centred with the ring and the beads of the tire are locked into place Hope this helps someone .

this a nice addition to the 1/35 Ford, but no mounting instructions are to be found. i tore up two tires before i figured it out , so you dont do the same , this is how you mount the rings. 1.Remove the foams and wheels from the tires. 2.press the wheel into the weight ring, so its flush with one side and the hole for the bead on the other side is exposed. 3.gently push the bead of the tire into the hole of the exposed bead. 4. once the bead is int turn the wheel around and push the wheel down , so the exposed bead hole locks in and exposes the bead hole on the other side. 5. gently push the bead of the tire into the hole of the exposed bead. 6. push the wheel down just a bit so its centred with the ring and the beads of the tire are locked into place Hope this helps someone .

little difficult to mount it but it had for sure a lot of stability and help a lot with roll over. bought 2 for the front only

little difficult to mount it but it had for sure a lot of stability and help a lot with roll over. bought 2 for the front only

little difficult to mount it but it had for sure a lot of stability and help a lot with roll over. bought 2 for the front only

Moderate shipping with air registered. Pros : This part almost create beadlock effect that make your car more realistic when crawling. Con : A little bit hard to put tire with beadlock ring. It might take some time to complete 4 of them

Moderate shipping with air registered. Pros : This part almost create beadlock effect that make your car more realistic when crawling. Con : A little bit hard to put tire with beadlock ring. It might take some time to complete 4 of them

Moderate shipping with air registered. Pros : This part almost create beadlock effect that make your car more realistic when crawling. Con : A little bit hard to put tire with beadlock ring. It might take some time to complete 4 of them

كل شيء جيد كما كان دائما

tutto ottimo come sempre

كل شيء جيد كما كان دائما

الشحن السريع 10 أيام

spedizione velocissima 10gg

الشحن السريع 10 أيام

buen producto, bien acabado, lo recomiendo para configurar el orlandoo y que pueda subir por los obstaculos.

buen producto, bien acabado, lo recomiendo para configurar el orlandoo y que pueda subir por los obstaculos.

buen producto, bien acabado, lo recomiendo para configurar el orlandoo y que pueda subir por los obstaculos.

parfaitement adaptée même au roue non original

parfaitement adaptée même au roue non original

parfaitement adaptée même au roue non original

a must for crawlers. a lot more stable with this

a must for crawlers. a lot more stable with this

a must for crawlers. a lot more stable with this

أداء لطيف

nice performance

أداء لطيف

عظيم، قم بالعمل

great, do the job

عظيم، قم بالعمل