Very good, works perfect for my skateboard. It fit perfect on my Paris trucks.

Very good, works perfect for my skateboard. It fit perfect on my Paris trucks.

Very good, works perfect for my skateboard. It fit perfect on my Paris trucks.

جيده

good

جيده

Need to use heaps of locktite 243 or stronger 15mm belt would be better, the 10mm one with this kit slips under large brake loads but is otherwise great. The 'aces' wheels from 'premierwheelco' in Australia fit perfectly with holes already there and drive cog outside dia the same as wheel inside dia. This style of wheel must have been used as the template for this kit. No affiliation just glad I lucked onto their site, cheap as well https://www.premierwheelco.com.au/product/aces/

Need to use heaps of locktite 243 or stronger 15mm belt would be better, the 10mm one with this kit slips under large brake loads but is otherwise great. The 'aces' wheels from 'premierwheelco' in Australia fit perfectly with holes already there and drive cog outside dia the same as wheel inside dia. This style of wheel must have been used as the template for this kit. No affiliation just glad I lucked onto their site, cheap as well https://www.premierwheelco.com.au/product/aces/

Need to use heaps of locktite 243 or stronger 15mm belt would be better, the 10mm one with this kit slips under large brake loads but is otherwise great. The 'aces' wheels from 'premierwheelco' in Australia fit perfectly with holes already there and drive cog outside dia the same as wheel inside dia. This style of wheel must have been used as the template for this kit. No affiliation just glad I lucked onto their site, cheap as well https://www.premierwheelco.com.au/product/aces/

The motor mount screws are not that great, I had to use a longer bolt and drill a hole in the axe and use metal epoxy to keep it secure, because it kept loosing up and fall. Fits a 5065 motor well. I`ve managed to fit it under a 80MM wheel but with some modifications. Kinda hard to find 70MM wheels with holes for the screws, so you will probably need to drill them out. Overall I`m pretty pleased for this, the belt didn`t break after some abuse.

The motor mount screws are not that great, I had to use a longer bolt and drill a hole in the axe and use metal epoxy to keep it secure, because it kept loosing up and fall. Fits a 5065 motor well. I`ve managed to fit it under a 80MM wheel but with some modifications. Kinda hard to find 70MM wheels with holes for the screws, so you will probably need to drill them out. Overall I`m pretty pleased for this, the belt didn`t break after some abuse.

The motor mount screws are not that great, I had to use a longer bolt and drill a hole in the axe and use metal epoxy to keep it secure, because it kept loosing up and fall. Fits a 5065 motor well. I`ve managed to fit it under a 80MM wheel but with some modifications. Kinda hard to find 70MM wheels with holes for the screws, so you will probably need to drill them out. Overall I`m pretty pleased for this, the belt didn`t break after some abuse.

I have a 6365 245 kV motor and the drivetrain is too small for this kind of power. Belt slip happens at full throttle and breaking hard. Belt tension is maximized. Required some 3D-printed parts to get the belt-pulley to sit nicely onto the wheel. My motor have to wide holes for mounting to fit the bracket, new ones had to be made. Plus for all extra screws that were included!

I have a 6365 245 kV motor and the drivetrain is too small for this kind of power. Belt slip happens at full throttle and breaking hard. Belt tension is maximized. Required some 3D-printed parts to get the belt-pulley to sit nicely onto the wheel. My motor have to wide holes for mounting to fit the bracket, new ones had to be made. Plus for all extra screws that were included!

I have a 6365 245 kV motor and the drivetrain is too small for this kind of power. Belt slip happens at full throttle and breaking hard. Belt tension is maximized. Required some 3D-printed parts to get the belt-pulley to sit nicely onto the wheel. My motor have to wide holes for mounting to fit the bracket, new ones had to be made. Plus for all extra screws that were included!

بالنسبة لي كان هذا صغيرًا جدًا لأن لدي لوحة جبلية أكبر ولم أكن أعرف ما كنت أفعله ولكن بالنسبة للوحة التزلج ، أنا متأكد من أن هذه ستكون جيدة. لكن لو كنت مكانك، سأوفر الوقت والمال وأذهب مباشرة لأحزمة 5 أمتار بدلاً من 3 أمتار

For me this was too small as I have a larger mountain board and didn't know what I was doing but for a skateboard I'm sure these would be fine. However if I were you I'd save time and money and go straight for 5m belts rather than 3m

بالنسبة لي كان هذا صغيرًا جدًا لأن لدي لوحة جبلية أكبر ولم أكن أعرف ما كنت أفعله ولكن بالنسبة للوحة التزلج ، أنا متأكد من أن هذه ستكون جيدة. لكن لو كنت مكانك، سأوفر الوقت والمال وأذهب مباشرة لأحزمة 5 أمتار بدلاً من 3 أمتار

تبدو جيدة، لم تستخدم بعد.

Look good, not used yet.

تبدو جيدة، لم تستخدم بعد.

أداء ممتاز ومنتج أصيل.

Excellent performance and a genuine product.

أداء ممتاز ومنتج أصيل.

أأ

Aa

أأ

جيده

good

جيده