وحدة محول واجهة اتصال سلسلة IIC I2C 5V LCD1602
تمت ترجمة جزء من المراجعة تلقائيًا.
This module is thinner than the usual. Standard I2C address is 0x20. It is not immediately visible, but A0,A1,A2 are physically connected to low. So to set up a different address you have to cut the connection, and solder desired pin to high. Also it is using nonstandard addresses, so instead of the original liquidcrystal i2c library you have to use this: https://github.com/t3chguy/LiquidCrystal_I2C_GY
منتج رائع
Nice tiny useful
I had few LCD and I was in need to spare some Arduino pins to use them for the I&C and i found this adapter as a good way of doing it. Like it and it worth the money i paid. Although, the adjustable trimmer might be a little bigger :)
لم يتم اختبارها بعد، ولكن تبدو مثل الآخرين الذين استخدمتهم
الشحن السريع والفعال. الطلب مجهز جيداً. سوف نختبر لاحقاً.
The I2C interface for LCD is ok
!جودة جيدة!
وحدة ذات نوعية منخفضة ويصعب اللحام. لا أنصح بهذا النموذج ينكسر بسهولة جداً وإذا كان يلحم فإنه يخرب الوحدة الأخرى أيضاً.
good deal