استعراضات العملاء

أكتب مراجعة
  • كل المراجعات (135)
  • صورة (6)
  • فيديو (0)
  • بداية الكل
    • بداية الكل(135)
    • 5 بدأ(126)
    • 4 بدأ(9)
    • 3 بدأ(0)
    • 2 بدأ(0)
    • 1 بدأ(0)
الترتيب حسب:
أفضل مراجعة
  • أفضل مراجعة
  • الأكثر أفاده
  • آخر
المراجعات من بلدك فقط (Iraq)
|
إظهار النسخة الأصلية

تمت ترجمة جزء من المراجعة تلقائيًا.

  • 01/08/2018

    I was able to get this working very quickly, but the values coming from the HX711, with no load on the bar, kept drifting very significantly. After a long troubleshooting session, I found out that the HX711 print has a major design flaw. They forgot to connect the AGND pin of the HX711 to GND, so it's just floating in the air, explaining the drifting. This can be fixed by soldering a wire between the GND pin on one connector and the E- pin on the other side. I found the exact same board on a different site with a picture of the schematics. This confirms that AGND is not connected to GND. See attached picture. It's also important to note that the print is designed to be supplied with 5V, even though the HX711 is specified to work down to 2.6V. The internal voltage regulator on the HX711 is configured with R12 and R13 to produce 4.2V across the sensor (E+ and E-). Considering the drop across the transistor, the supply voltage needs to be about 4.5V (or up to 5.5V), otherwise the regulator can't do its job. If a 3.3V supply is provided, the resistors can be changed accordingly. If you use it as is on 3.3V, be aware that the built-in regulator will not be able to do its job, so any ripple on the supply voltage will influence the measurement.

    تعليقات (3)
    إظهار النسخة الأصلية
  • uhmVIP3
    DK
    28/02/2019

    Tested on a Professional instrument, and accuracy is within +- 5%, acceptable for this price.

    تعليقات
    إظهار النسخة الأصلية
  • 04/11/2017

    It is okay and very sensitive. it may need fine tune when putting in use. There are so many things may affect its reading.

    تعليقات
    إظهار النسخة الأصلية
  • 19/10/2017

    Nifty little 20kg load cell for measuring weight / thrust.

    تعليقات
    إظهار النسخة الأصلية
  • 30/01/2021

    تم استلامها بشكل جيد و كان الساعي سريعاً الطرد كان مكتظاً أيضاً، شكراً، لكن ما زال بحاجة للإختبار

    تعليقات
    إظهار النسخة الأصلية
  • 30/08/2020

    وصلت الحزمة كما هو موضح

    تعليقات
    إظهار النسخة الأصلية
  • 16/11/2019

    excelente para proyectos

    تعليقات
    إظهار النسخة الأصلية
  • 20/10/2017

    Nice product.

    تعليقات
    إظهار النسخة الأصلية
  • 27/10/2022

    رأس

    تعليقات
    إظهار النسخة الأصلية
  • 19/05/2022

    تم الاستلام في حالة جيدة. يبدو كبيرا على الصورة ولكن الشيء الحقيقي صغير جدا.

    تعليقات
    إظهار النسخة الأصلية
Show:

    مجموع 0 الصفحات

    انتقل إلى صفحة

    قد تكون مهتمة ايضا بـ

    recommendation for you
    • US$5.21
    • US$4.99
    • US$13.99
    • US$43.99
    • US$7.99
    • US$11.09
    • US$15.99
    • US$11.99
    • US$7.99
    • US$10.99
    • US$12.49
    • US$6.69
    • US$4.99
    • US$3.99
    • US$5.99
    • US$8.99
    • US$7.99
    • US$8.99