Ken Make sure the throttle trim is set to zero.

volki bilmiyorum

BG111254537 Yes, this is a bank and yank setup. For the elevators you will need to use two channels on your receiver. Each elevator servo should be in its own channel. Once done you will have to go into your tran... Yes, this is a bank and yank setup. For the elevators you will need to use two channels on your receiver. Each elevator servo should be in its own channel. Once done you will have to go into your transmitter and setup one of your elevator servos to be slaved to the other channel. That way both will move at the same time. You might have to reverse one or both servos in you transmitter as well to make sure they are moving in the correct direction. The ailerons can just use a “Y” harness and plugged into your channel 4 slot. If you want Flaperons for slower landing speed you will have to setup your ailerons like the elevators. شاهد المزيد

Grumpy12 Yes it does

BG813155416 No but the servos are cheep and break easily. I've broken several while learning to fly. I keep extras on hand. But I haven't broken any in quite a while. Just don't crash and you'll be fine.

sal.fav 19.5 inches long