MattUs
محتوياتي
كل الرسائل
استعراضات
تعليقات
أجابات
الأسئلة

كل الرسائل

MattUs 13/02/2020
مزود طاقة حساس 1000 واط اتصالات SMPS محول AC 110 / 220 فولت إلى DC 0-12 / 24 / 36 / 48 فولت مع شاشة عرض رقمية مزدوجة LCD
US$122.99 US$161.99
1
التوصيات
تعليقات (0)
MattUs 16/01/2020
So far I am very happy with this.The adjust-ability of voltage and current make this power supply far more versatile than the common fixed value ones. I bought the 12V 70 amp version and I use mine mainly for a fast automotive charger. the voltage limiting protects the cars electronics from over volt. current limiting lets me do trickle charge. you can also use this to charge lithium batteries, (but verify your settings first to prevent over charging!) I just tested it and it works just as I expected. (Warning be careful if using on 220V!) the label on mine was backwards and at 220V it will likely damage the unit if in the wrong position. make sure to look at the markings on the switch it self! not the label and all should be good. The voltage on mine has full adjust-ability from 0.0V to about 16.2V and the multi-turn pots let you set with accuracy. mine was able to deliver almost 75 amps, but I don't recommend exceeding the rated 70 for more than a brief moment. that's a lot of amperage for such a small package.
مزود طاقة حساس 1000 واط اتصالات SMPS محول AC 110 / 220 فولت إلى DC 0-12 / 24 / 36 / 48 فولت مع شاشة عرض رقمية مزدوجة LCD
US$122.99 US$161.99
1
التوصيات
تعليقات (1)
MattUs 02/04/2020
As others have mentioned the grind quality is very good if not excellent. I think the official photos on the Banggood listing may be old stock as the set I received actually looks much beater than the official photos. Ill try to upload a closeup of the set I received. So far I have used a few of these in both mild and high grade frame steel and the performed very well. on par with my fractional inch set of Milwaukee cobalt bits which cost way more for about half as many bits. Note they do not come with a case. however if you have a 3d printer, I designed one specifically for this set and posted the files on thingverse; thing # 4251707 https://www.thingiverse.com/thing:4251707
Drillpro 25pcs 1-13mm HSS M35 Cobalt مثقب لولبي Bit Set for Metal Wood Drilling
US$33.99 US$50.99
5
التوصيات
تعليقات (2)
MattUs 02/04/2020
Like Piranhas for your mill! These things cut fantastic even in high grade frame steel. good geometry and very hard.
منشار كربيد التنجستن 4 فتحات 1-10 ملم HRC65 مغلف بالناكو الأزرق مجهز بفريزة CNC
US$10.99
1
التوصيات
تعليقات (0)
MattUs 13/08/2020
These are my most commonly used carbide. The blue nano cuts better and lasts longer than other coatings; especially in hardened steels.
دريلبرو 10pcs HRC45 نانو الأزرق CNMG120408-MA US735 لإدخال الكربيد لحامل أداة الخراطة MCLNR / L
US$22.99 US$27.99
1
التوصيات
تعليقات (0)
MattUs 22/09/2020
these cut very well!
Drillpro 10 قطعة HRC45 الأزرق Nano MGMN200-G 2 مللي متر كربيد إدراج لحامل أداة تحول MGEHR / MGIVR
US$10.25 US$21.99
0
التوصيات
تعليقات (0)
MattUs 22/09/2020
Only used a few times so far, but with the blue nano inserts I bought for it here as well, it cuts much better than my HSS parting tool. the inserts have a relief formed in them which prevents most of the jamming of chips along the sides. the tool holds the insert tighter than I expected; it is not likely to come out under normal usage.
حامل أداة قطع MGEHR2020-2 بقطر 20 × 125 مم لخراطة الحز القاطع لمداخل MGMN200
US$17.99 US$21.99
0
التوصيات
تعليقات (0)
MattUs 30/07/2020
Well made tool and works as expected. Note I had to turn a section of the shank down to 20mm to fit the largest of my ER32 collets I use in my mill; no surprise , I knew that before buying.
300R C25-25-150 طحن تولهولدر مخرطة نك أربور ل APMT1135 إدراج
US$22.89 US$23.99
0
التوصيات
تعليقات (0)
20 ملليمتر 60 درجة هس تتوافق الطحن القاطع مستقيم عرقوب النجارة الطحن القاطع
US$11.56 US$13.99

سؤال: shank size?

السؤال بواسطة BG674810352 على 2020-06-05 04:42:11

MattUs 12mm

2020-06-06 03:00:47 مساعدة (0)
عرض
أجابات (3)
مثقاب دريل برو 400R 80 مم ، 6 شفرات ، ملقط MT2 FMB27 بمقبض ، مع 6 قطع من أدوات القطع بالكربيد APMT1604
US$65.48 US$69.76

سؤال: does center bore in arbor go all the way through? I have unusual setup where draw is tightened through arbor from bottom. I am currently using this setup for milling with a mt2 to er32 adapter arbor. Now that I have received this I can answer this my self. With the head retaining bolt removed, the bore does in fact go all the way through. I will use this the same as my MT2 to ER32 adapter, with a custom insert threaded in the draw bar threads and a smaller diameter bolt pulling up through a hole in the center of the insert. the small bolt then threads in to a cross bar in the MT2 knock out port.

السؤال بواسطة MattUs على 2019-12-16 11:35:33

Happypear good

2020-01-06 01:11:59 مساعدة (0)
عرض
أجابات (1)
MattUs 02/04/2020
Its no bench scope, but for under$70 US it is a a surprisingly handy and capable field scope, so long as you understand its limitations. It is particularly useful when you need measure with an isolated ground. The battery seems to give good run time and the display is clear and sharp for its size. the on screen menus are laid out well and easy to use. the automated frequency readout, as apposed to the actual graph, seems a little fussy about the wave form to me, but other than that it does what I expect. The case provides good protection, but should have been about 10mm taller to better accommodate the probe; it fits, but the strain relief gets bent quite sharply. I noticed that some people were complaining about scratches, so I am mentioning that there is a screen protector film on it from the factory, but it is hard to see the edge and realize that it is there; try picking at the corner even if you don't see it.
DANIU ADS5012H رقمي 2.4 بوصة TFT شاشة راسم الذبذبات المضاد للحرق 500 مللي ثانية / ثانية أخذ العينات معدل100 ميجا هرتز عرض النطاق الترددي التناظري الدعم ت
US$113.29 US$119.99
1
التوصيات
تعليقات (0)
MattUs 18/05/2020
They seem to cut well! I have used 2 sizes in hardened tool steel so far and both performed very well.
Drillpro 8 قطع Blue Naco 2-12mm 4 فلوتس كربيد مجموعة ميل إتش آر سي50 أداة قاطعة من الصلب بالتنغستن
US$37.99 US$55.99
0
التوصيات
تعليقات (0)
MattUs 10/05/2020
I ordered the MT2 version and the fit and finish is good.
حامل شريحة الثقب R8 MT3 MT2 للمخرطة
US$19.99 US$33.99
0
التوصيات
تعليقات (0)
MattUs 10/05/2020
Seems to be solid enough and adjustment moves precisely. holds boring bar good and tight and fit is good with the arbor I bought for it.
رأس تثقيب قطره 50 ملم للمخارط والمطاحن
US$35.99 US$56.99
0
التوصيات
تعليقات (0)
Drillpro 25pcs 1-13mm HSS M35 Cobalt مثقب لولبي Bit Set for Metal Wood Drilling
US$33.99 US$50.99

سؤال: Can you supply this set of drill bits in a steel case similar to the HSS set shown

السؤال بواسطة Bob على 2018-11-09 07:59:06

MattUs If you have a 3D printer, try this... thingiverse #4251707

2020-04-02 11:52:09 مساعدة (0)
عرض
أجابات (3)
0-0.8 0.01 مقياس مؤشر مقياس الدقة محمول متر أداة حجم
US$28.59 US$31.99

سؤال: It`s shockproof ??

السؤال بواسطة edeko على 2020-02-29 05:37:37

MattUs Idon't know for sure but I doubt it. .This is a mechanical high precision measuring instrument. I would expect any device like this to strip under a shock load; not a flaw, just the nature of that much multiplication of movement against the tiny gears that drive the needle.

2020-03-02 09:21:19 مساعدة (0)
عرض
أجابات (1)
MattUs 28/02/2020
Its a good switch for light industrial applications. I use this as a disconnect for the VFD, DRO and other electronics on my mill conversion. The wiring space is a bit cramped, but that is to be expected in such a compact unit. The housing is a fairly thick and rugged plastic and it is easy to mount with 2 screws under the lid.
3.7KW 30A قوة Push Button Switch Momentary Switch
US$8.15 US$15.98
0
التوصيات
تعليقات (0)

MattUs it's been several days and banggood hasn't posted my video review yet, so here is the address if you want to check it out. https://youtu.be/CQRFiM6TXOk

MattUs 16/01/2020
So far I am very happy with this.The adjust-ability of voltage and current make this power supply far more versatile than the common fixed value ones. I bought the 12V 70 amp version and I use mine mainly for a fast automotive charger. the voltage limiting protects the cars electronics from over volt. current limiting lets me do trickle charge. you can also use this to charge lithium batteries, (but verify your settings first to prevent over charging!) I just tested it and it works just as I expected. (Warning be careful if using on 220V!) the label on mine was backwards and at 220V it will likely damage the unit if in the wrong position. make sure to look at the markings on the switch it self! not the label and all should be good. The voltage on mine has full adjust-ability from 0.0V to about 16.2V and the multi-turn pots let you set with accuracy. mine was able to deliver almost 75 amps, but I don't recommend exceeding the rated 70 for more than a brief moment. that's a lot of amperage for such a small package.
مزود طاقة حساس 1000 واط اتصالات SMPS محول AC 110 / 220 فولت إلى DC 0-12 / 24 / 36 / 48 فولت مع شاشة عرض رقمية مزدوجة LCD
US$122.99 US$161.99
1
تعليقات (1)
SRDCN2020K10 مخرطة تحول أداة حامل مع T8 وجع ل RCMT1003MO إدراج
US$16.80 US$18.89

سؤال: What are the correct inserts for this? I bought Blue Nano HRC52 RDMT10T3MOTN NB7010, but the hole is too big and they look to be too tall as well.

السؤال بواسطة MattUs على 2020-01-30 11:32:36

Wharfinger for RCMT1003MO Insert

2020-02-04 03:11:03 مساعدة (2)
عرض
أجابات (1)
MattUs 02/02/2020
After getting one for my self, I liked it so much that I bought another for my Daughter; She is very happy with hers as well! They are very well made. I use mine a lot for past two months, and it is still in great shape.
بستة تسخين ذكية بقابس كهربائي ساخنة بالتيار الرئيسي مع إمكانية التحكم بدرجة الحرارة تعتبر الأفضل لفصل الشتاء
US$59.99 US$67.99
0
التوصيات
تعليقات (0)

أنت الخبير ، هل يمكنك المساعدة؟

ندعوك بصدق للاشتراك في البريد الإلكتروني Invite Answer!

إذا قمت بالاشتراك ، فسندعوك عبر البريد الإلكتروني للإجابة على الأسئلة التي يطرحها الأشخاص حول المنتجات. باشتراكك] سوف تكسب أيضًا "شارة مفيدة "! يمكنك إلغاء الاشتراك في أي وقت على صفحة إعدادات الخصوصية.

ساعد الآخرين وكن أكثر سعادة!

  • الإشتراك

حول الشارات

ترتبط الشارات بالمجتمع ، ويكسب المستخدمون شارات عن طريق إنشاء محتوى عالي الجودة ، أو إكمال المهام ، أو عن طريق المشاركة في أنشطة خاصة. وسيكون للأشخاص المعنيين أيضًا شارة خاصة بهم.
شارة الرئيس التنفيذي

شارة المدير التنفيذي مملوكة فقط من قبل رئيس شركة بانجوود.

شارات يمكنك كسب قريبا
  • حسنا

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • حسنا

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe