كل الرسائل

Mikeinnc Yes, mine too. Delivered October 2020 - old bootloader. It does say 'improved version' - does this mean new bootloader is installed?

Centipede 2020-07-12 23:23:15
تعليقات (1)

سؤال: Whats the dimension of lens with cover? I want to put it in my peephole

السؤال بواسطة pawi552 على 2020-10-15 12:28:29

Mikeinnc The camera lens is 14mm diameter (or 0.55 inch if you use old fashioned measurements......). That's without the plastic lens cover which I assume you wouldn't use in a peep-hole.

2020-10-15 09:07:21 مساعدة (0)
أجابات (1)

سؤال: what do they call the wire strip connected to the camera

السؤال بواسطة BG101249473 على 2020-09-25 04:15:52

Mikeinnc I'd call it the ' flexible camera bus cable'.

2020-09-27 08:36:10 مساعدة (0)
أجابات (3)

سؤال: how much megapixel?? it is working with raspberry pi 4? it is working in the dark as well?

السؤال بواسطة BG091951504 على 2020-07-19 03:55:58

Mikeinnc Just check the 'Features' section of the Banggood page for this camera. It will answer ALL your questions! (But FYI, yes, it works with RPi4; it is a 5megapixel camera and it will work in the dark with infrared illumination. In 'normal' light, the colours will be 'wrong' as it is a NOIR camera.)

2020-07-21 02:13:38 مساعدة (0)
أجابات (1)

سؤال: does these units come with tamper switch's or not now ???? as in the specifications it states they do ???

السؤال بواسطة lindisxsky على 2018-10-29 03:51:10

Mikeinnc There is no tamper switch mounted on the PCB, although it appears there are mounting PTH holes to mount one. The holes are in a 'square' formation - 5mm between hole centres. I would think 'GeekcreitMini Micro Momentary Tactile Touch Switch Push Button DIP P4 Normally Open' (ID: 917570 ) would probably fit, although may need to adapt for the hole in the back cover?

2020-06-21 11:22:40 مساعدة (0)
أجابات (5)

سؤال: Does it work with a shutter roller?

السؤال بواسطة Emanuel Frish على 2020-06-01 06:52:57

Mikeinnc It's basically an on-off switch controlled over wifi. My guess is that it will operate anything that requires an on-off process. So, yes, fundamentally it would open and close a door via a motor turning on and off. BUT - and it is a BIG BUT - I believe you would need a good understanding of electronics to be able to interface it to the door mechanism and associated up-down limit switches. Hope that helps?

2020-06-01 11:53:00 مساعدة (0)
أجابات (1)

سؤال: Is this compatible with a wireless wall switch? If yes, which ones?

السؤال بواسطة hannandor على 2020-05-05 06:53:45

Mikeinnc Your question seems illogical. This IS a wireless wall switch - it is designed to work in conjunction with a normal on-off light switch; installed in the wall box that supports the normal switch, and uses wifi transmissions via your home wireless network to allow it to be operated (and programmed) remotely. When flashed with the readily available 'Tasmota' software, it becomes an excellent, fully functional local OR remote device. Hope that helps?

2020-05-05 07:30:30 مساعدة (0)
أجابات (4)