الشحن الى United Kingdom , USD
أعلى مراجعة إيجابية لـ %s على Banggood, تسوق أفضل %s بأقل سعر على Banggood. تصفح المراجعات الإيجابية الأكثر إفادة لـ %s قبل الشراء., ألعاب أرسي ، رياضة ممتعة ، أزياء ، إلكترونيات شعبية
Hobbyboy 16/10/2022
Arrived on time, way to go BG. First let me say this thing is tiny and a "Fatty" all rolled up into a cute warbird. likes: I like the look and I'm hoping it will fly stable at this size. It has a Stablized control unit inside so that should help. A single Aileron servo in the 1.7g range connected to push rod linkages, like you'd see on some wood airplanes. The motor gearbox looks solid enough and appears to be in the 20mm range. plenty of room inside which I like a lot. Dislikes: The control board looks toyish and having the servo mounted too it makes it look more toyish. This should've been a 4ch bird with a Rudder! Another miss is a dedicated battery location. As it is the battery is free to move around, unless you secure it. The only place is the battery hatch area. and it would be hard to mount a small 1s pack. The tx is what it is and if the power system doesn't work for me I'm going to swap it out. Besides these minor set backs I still like the overall look, it so cute. I think it will turn heads also on a slow fly-by. Another thing I like is the use of sbus rx as you can just plug in a rx of your choice or use the supplied tx, I hope that's how it works!
0
تعليقات (2)
عرض
  • Hobbyboy Update so the gyro Stablized board doesn't work properly causing my bird to constantly nose in. If and when it does the controls seem stuck. The only thing that does work properly is the motor and gearbox. Plenty of power for this little guy. I tried fixing it but no change. All I did was re-adjusted the linkage to the elevator servo. That didn't work because the tail still goes down as the plane sits. It does not level out, even if you prop the tail up level and plug in battery. It looks nice but mines will not fly properly.

    رد 24/10/2022
  • Hobbyboy update: My Fatty came in messed up! Elevator doesn't level out, it always goes to down elevator. I adjusted the servo output arm and it still returned to a down elevator position. Pushing the button to go from stabilized to unstablized didn't work. The Ailerons barely moved and also stayed in a fixed position. The motor has plenty of power and possible would've good if the control unit actually worked as it should've. I hope others had better luck because I didn't!

    رد 06/11/2022
قياس مدى الرضا

حمل التطبيق للحصول على كوبون خصم بقيمة 10% حصرياً