طائرة إي بي بي لتدريب مبتدئين لرحلات الطيران بجناح ثابت ومسافة جوية 800 مم لـ FPV RC
تمت ترجمة جزء من المراجعة تلقائيًا.
Well thought out kit with nicely cut parts. 3D printed motor mount. Would be a bonus if the stl file is available. Only negative is that the one sheet, photocopied instructions are only Chinese. The parts fit together well and will make a good sub 250g wing. Could easily fit an AIO FPV camera on the front. Recommended.
nice epp lots of carbon, only thing where is the COG?
جناح سهل جداً لتركيبه مستقر جداً، إذا كان استخدام البطارية 550 و850 لا يحتاج للبحث عن سي جي والبطارية التي أستخدمها تطير بشكل كبير مع هذه البطارية 550 و850، فقط انتبه إلى عدم الطيران حيث يمكن أن تهتز الرياح أو المشعل، أنت راضي
طائرة ممتازة للمبتدئين. البناء أخذ 10 دقائق يبدو قوياً جداً استخدمت ميكرو eSC، 12a esc، 2280kv نجم سباق، 3 شفرات 4 بوصة، 800mah 2s ويطير بسرعة وببطء. لكن ضعيف قليلاً جناح مشذب بالسكين لتقليل السحب تحتاج إلى رسم جانب واحد للمساعدة في التوجيه
Great little wing flys great as suggested although I have modded with an all in one Eachine TX06, smooth flying on an 1806 motor with a 5045 tri blade prop and a 20a esc powered by a 800mAh 2s lipo or a 550mAh 3s lipo 12-15 minute flight times with plenty of mAh to spare.all up weight well under the dreaded 250g, Its alot of fun and very inexpensive, a great way to spend a lazy afternoon to do some fpv cruising. I highly reccomend.
Very nice EPP plane, lots of carbon plus decent 3d printed mount. Properly painted to.
متنزّه مثالي بطيئ، قويّ جداً!
حزمة جيدة، عدة بسيطة لكن لا بأس بها
https://www.youtube.com/watch?v=edviFjZatoE
هذا مبتديء ودود مع وزن خفيف