استعراضات العملاء

أكتب مراجعة
  • كل المراجعات (252)
  • صورة (28)
  • فيديو (0)
  • بداية الكل
    • بداية الكل(252)
    • 5 بدأ(232)
    • 4 بدأ(11)
    • 3 بدأ(5)
    • 2 بدأ(1)
    • 1 بدأ(3)
الترتيب حسب:
أفضل مراجعة
  • أفضل مراجعة
  • الأكثر أفاده
  • آخر
المراجعات من بلدك فقط (Iraq)
|
إظهار النسخة الأصلية

تمت ترجمة جزء من المراجعة تلقائيًا.

  • 27/05/2015

    I read the negative feedback so I was a little daunted. I have just received the shield and after setting a couple of jumpers and wiring to a Uno sent and received SMS no problem. THE REVIEWS ARE TOTALY WRONG. Works very good product. Peter

    تعليقات (2)
    إظهار النسخة الأصلية
  • 11/05/2017

    Although I have not tested all the functionalities, I got the shield to make a call, so I assume that the rest of the functions also work. So long story short, I am very happy with this shield. I found it a bit hard to start with though: After making sure the shield can connect to a network (led blinking with about 1 sec interval) I was not able to use the standard arduino libraries (GSM and GSMtiny) to send an sms/tekst or make a call. It was confusing how to use the jumpers etc. BUT, this item comes with a very usefull and elaborate manual. You can find ik in the questions section below or go here: https://drive.google.com/file/d/0BxSj_zgPes0yNGQwVTBsZ3RvbWM/view Banggood, maybe it is a good idea to make a reference to this link in the main item page, just so people can find it quicker.

    تعليقات (3)
    إظهار النسخة الأصلية
  • 25/06/2015

    Devo ancora provarla , vi invio il link della documentazione https://www.dropbox.com/s/jbulraa9x81tx8i/Arduino%20GPRS%20Shield.doc?dl=0

    تعليقات
    إظهار النسخة الأصلية
  • 06/12/2015

    Works perfect. Writing a working sketch in arduino is a little bit more difficult because libraries found online doesn't work with this module. You must make your own library or sketch from beginning.

    تعليقات (1)
    إظهار النسخة الأصلية
  • 11/12/2019

    The SIM module is good, to send sms and to call. :)

    تعليقات (1)
    إظهار النسخة الأصلية
  • 25/02/2020

    لم أكن قادراً على جعله يعمل عندما يكون متصلاً مباشرة بنسخة مكتب الأمم المتحدة ومع ذلك فإنه يعمل بشكل مثالي عند استخدام دبابيس Rx وTx وGnd من UART تحت الحالة ومصابيح NetLight (كما هو موضح في الصورة). بالنسبة لمشروعي لا بأس به، ولكن يمكن أن تكون مشكلة إذا أردت تكديس الدرع. بالإضافة إلى أنها ليست جديدة تماماً ولكن مهلا، في هذه النقطة السعر لا أستطيع أن أشكو بما أنها تعمل!

    تعليقات
    إظهار النسخة الأصلية
  • 15/09/2019

    Its seems all ok. Just a litle mess in one solder component. Good produt

    تعليقات
    إظهار النسخة الأصلية
  • 09/02/2017

    the DC-DC converter MIC29302WU on the board has 5 pins and uses about 7mA in standby. I cut all traces to pin 1 and 2 and connected pin 2 to RAW and pin 1 to an unused port. so i can shut down the DC-DC converter completely. HIGH on pin1: MIC29302WU working LOW on pin1: MIC29302WU shut down, no current use! best wishes from austria

    تعليقات
    إظهار النسخة الأصلية
  • 09/12/2019

    Like on the description, delivery was fast, i am happy about it. I did not yet try it. Just a pity there is not the male pins to plug the shield directly on the arduino

    تعليقات
    إظهار النسخة الأصلية
  • 26/08/2018

    Well it came very fast,like 7-8 working days. (location Greece) The package was in a good condition and the shield itself also. I havent tested it yet but I dont see any damage.

    تعليقات (1)
    إظهار النسخة الأصلية
Show:

    مجموع 0 الصفحات

    انتقل إلى صفحة

    recommendation for you
    • US$54.05
    • US$43.19
    • US$25.75
    • US$9.99
    • US$11.99
    • US$7.99
    • US$23.99
    • US$15.82
    • US$26.99
    • US$8.99
    • US$43.51
    • US$19.99
    • US$31.99
    • US$28.99
    • US$7.99
    • US$19.99
    • US$6.99
    • US$15.99