Banggood

Comments so far: - Plenty of space and good looks. - The elastic rings could be more firm on the motor openings. - Seems to have too much space up front, camera is better placed in front of the two front posts. - Frame is more flexible than I expected. Both negative and positive. - Great clearance for 55mm props, kind of tricky for 65mm props.

Comments so far: - Plenty of space and good looks. - The elastic rings could be more firm on the motor openings. - Seems to have too much space up front, camera is better placed in front of the two front posts. - Frame is more flexible than I expected. Both negative and positive. - Great clearance for 55mm props, kind of tricky for 65mm props.

Comments so far: - Plenty of space and good looks. - The elastic rings could be more firm on the motor openings. - Seems to have too much space up front, camera is better placed in front of the two front posts. - Frame is more flexible than I expected. Both negative and positive. - Great clearance for 55mm props, kind of tricky for 65mm props.

This little frame will take 8025 motors & the supplied supports are just enough. personally I drilled out the holes to use M2 supports. It's taken an absolutely beating & I've not broken it yet.

This little frame will take 8025 motors & the supplied supports are just enough. personally I drilled out the holes to use M2 supports. It's taken an absolutely beating & I've not broken it yet.

This little frame will take 8025 motors & the supplied supports are just enough. personally I drilled out the holes to use M2 supports. It's taken an absolutely beating & I've not broken it yet.

First micro I've built, it joins my mini micro fleet along side the QX95 and EX110. I've read reviews stating you have to drill, or otherwise modify, the sealing rings in order to get 8520 motors to fit, that isn't the case. I got mine in without any problems, pushing them up through the bottom. It's a tight fit but it's supposed be, you want them snug, and they are. I added an LED strip under the camera for FPV in the dark. Take off weight is 60g, it's not my lightest, or fastest, 8mm brushed micro but it's fun to fly in the dark. Only thing I don't like is the back standoff being right in the middle, I can't access the USB port without removing it. But a FC with a side port would alleviate that problem. Overall I really like this frame and highly recommend it.

First micro I've built, it joins my mini micro fleet along side the QX95 and EX110. I've read reviews stating you have to drill, or otherwise modify, the sealing rings in order to get 8520 motors to fit, that isn't the case. I got mine in without any problems, pushing them up through the bottom. It's a tight fit but it's supposed be, you want them snug, and they are. I added an LED strip under the camera for FPV in the dark. Take off weight is 60g, it's not my lightest, or fastest, 8mm brushed micro but it's fun to fly in the dark. Only thing I don't like is the back standoff being right in the middle, I can't access the USB port without removing it. But a FC with a side port would alleviate that problem. Overall I really like this frame and highly recommend it.

First micro I've built, it joins my mini micro fleet along side the QX95 and EX110. I've read reviews stating you have to drill, or otherwise modify, the sealing rings in order to get 8520 motors to fit, that isn't the case. I got mine in without any problems, pushing them up through the bottom. It's a tight fit but it's supposed be, you want them snug, and they are. I added an LED strip under the camera for FPV in the dark. Take off weight is 60g, it's not my lightest, or fastest, 8mm brushed micro but it's fun to fly in the dark. Only thing I don't like is the back standoff being right in the middle, I can't access the USB port without removing it. But a FC with a side port would alleviate that problem. Overall I really like this frame and highly recommend it.

ВАУ! Все вошло просто отлично! Рама крепкая и легкая (камера ef-01) Вес без батареи ~39 г.

ВАУ! Все вошло просто отлично! Рама крепкая и легкая (камера ef-01) Вес без батареи ~39 г.

ВАУ! Все вошло просто отлично! Рама крепкая и легкая (камера ef-01) Вес без батареи ~39 г.

As far as brushed frames go, this is getting seriously lightweight. It's not horrendously stiff, but if you're through the constant crashing stage of quad flying it's strong enough to brush off the lighter "Whoops" moments without breaking. The only real problem is that most brushed FC's have the USB port on the back, So the single rear post gets on the way of it. To solve that I just built it reversed, so the camera is mounted under that "Fish tail" bit (Cut down slightly) with a cable tie.. Flyes pretty well and can convincingly acro without ripping itself apart. On these micros the enemy is always weight, So having a frame this light is a pretty good starting point

As far as brushed frames go, this is getting seriously lightweight. It's not horrendously stiff, but if you're through the constant crashing stage of quad flying it's strong enough to brush off the lighter "Whoops" moments without breaking. The only real problem is that most brushed FC's have the USB port on the back, So the single rear post gets on the way of it. To solve that I just built it reversed, so the camera is mounted under that "Fish tail" bit (Cut down slightly) with a cable tie.. Flyes pretty well and can convincingly acro without ripping itself apart. On these micros the enemy is always weight, So having a frame this light is a pretty good starting point

As far as brushed frames go, this is getting seriously lightweight. It's not horrendously stiff, but if you're through the constant crashing stage of quad flying it's strong enough to brush off the lighter "Whoops" moments without breaking. The only real problem is that most brushed FC's have the USB port on the back, So the single rear post gets on the way of it. To solve that I just built it reversed, so the camera is mounted under that "Fish tail" bit (Cut down slightly) with a cable tie.. Flyes pretty well and can convincingly acro without ripping itself apart. On these micros the enemy is always weight, So having a frame this light is a pretty good starting point

Good points are that this is very light and gives you plenty of room to add your FPV kit. Bad points are that it's made light by cutting out so much carbon that it ended up a little flimsy, and that central rear standoff get's in the way of the FC's USB socket. I ended up slicing some of the top decks "Fish tail" off to use it as a camera mount and building the frame back to front. Flyes well on the Racerstar motors and 56mm props.

Good points are that this is very light and gives you plenty of room to add your FPV kit. Bad points are that it's made light by cutting out so much carbon that it ended up a little flimsy, and that central rear standoff get's in the way of the FC's USB socket. I ended up slicing some of the top decks "Fish tail" off to use it as a camera mount and building the frame back to front. Flyes well on the Racerstar motors and 56mm props.

Good points are that this is very light and gives you plenty of room to add your FPV kit. Bad points are that it's made light by cutting out so much carbon that it ended up a little flimsy, and that central rear standoff get's in the way of the FC's USB socket. I ended up slicing some of the top decks "Fish tail" off to use it as a camera mount and building the frame back to front. Flyes well on the Racerstar motors and 56mm props.

I use this frame with my build micro quad copter. this frame have light weight just 7 grams. see it fly acrobatic in this video https://www.youtube.com/watch?v=oPUS2Pn6kuM

I use this frame with my build micro quad copter. this frame have light weight just 7 grams. see it fly acrobatic in this video https://www.youtube.com/watch?v=oPUS2Pn6kuM

I use this frame with my build micro quad copter. this frame have light weight just 7 grams. see it fly acrobatic in this video https://www.youtube.com/watch?v=oPUS2Pn6kuM

Backup frame for my micro M110 drone. One of the best brushed carbon frame out there. It is lightweight and you can use 60/65mm propellers. " Order Shipping Treatment (OST) " took a long time (6days), but " Fast Sending Abroad (FSA) " after. Overall delivery time was decent. Otherwise product is AE (As Expected). Thx, - You don't already have a quad ? Eachine Wizard X220 RTF http://bit.ly/EWX220RTFV - My Shopping List (In progress) http://bit.ly/hbf2usl

Backup frame for my micro M110 drone. One of the best brushed carbon frame out there. It is lightweight and you can use 60/65mm propellers. " Order Shipping Treatment (OST) " took a long time (6days), but " Fast Sending Abroad (FSA) " after. Overall delivery time was decent. Otherwise product is AE (As Expected). Thx, - You don't already have a quad ? Eachine Wizard X220 RTF http://bit.ly/EWX220RTFV - My Shopping List (In progress) http://bit.ly/hbf2usl

Backup frame for my micro M110 drone. One of the best brushed carbon frame out there. It is lightweight and you can use 60/65mm propellers. " Order Shipping Treatment (OST) " took a long time (6days), but " Fast Sending Abroad (FSA) " after. Overall delivery time was decent. Otherwise product is AE (As Expected). Thx, - You don't already have a quad ? Eachine Wizard X220 RTF http://bit.ly/EWX220RTFV - My Shopping List (In progress) http://bit.ly/hbf2usl

This frame is an exceptional value. Like most people who bought the Fatbee, mine busted - it brushed up against a tree branch and an arm broke. So I transplanted the whole thing into this minus the ducts (which were mostly broken anyway). You'll need to open up the grommets a little with a drill bit to squeeze the 8mm motors in, just be careful not to split them. Also I'm not sure the top plate is needed, can save 2grams. Total weight minus battery is 36g. Flies super smooth with 2S power, I do need to order some lighter batteries though. I will be ordering a couple spares for sure.

This frame is an exceptional value. Like most people who bought the Fatbee, mine busted - it brushed up against a tree branch and an arm broke. So I transplanted the whole thing into this minus the ducts (which were mostly broken anyway). You'll need to open up the grommets a little with a drill bit to squeeze the 8mm motors in, just be careful not to split them. Also I'm not sure the top plate is needed, can save 2grams. Total weight minus battery is 36g. Flies super smooth with 2S power, I do need to order some lighter batteries though. I will be ordering a couple spares for sure.

This frame is an exceptional value. Like most people who bought the Fatbee, mine busted - it brushed up against a tree branch and an arm broke. So I transplanted the whole thing into this minus the ducts (which were mostly broken anyway). You'll need to open up the grommets a little with a drill bit to squeeze the 8mm motors in, just be careful not to split them. Also I'm not sure the top plate is needed, can save 2grams. Total weight minus battery is 36g. Flies super smooth with 2S power, I do need to order some lighter batteries though. I will be ordering a couple spares for sure.

Light and solide frame with a lot off space. I also created a camholder for a EF-01 cam.

Light and solide frame with a lot off space. I also created a camholder for a EF-01 cam.

Light and solide frame with a lot off space. I also created a camholder for a EF-01 cam.