تعمل البطاقة. الوصول إليها في SSH 192.168.1.150 الجذر كلمة المرور admin. تثبيت نسخة من openwrt. يمكنك التواصل مع اردوينو مع المسلسل /dev/ttyS0 باود 57600.ربط كاميرا ويب يولد تيار في http://192.168.1.150:8080/?action=stream

card works. accessed in SSH 192.168.1.150 root password admin. installed a version of openwrt. you communicate with Arduino with the serial /dev/ttyS0 Baud 57600.connecting a webcam generates the stream in http://192.168.1.150:8080/?action=stream

تعمل البطاقة. الوصول إليها في SSH 192.168.1.150 الجذر كلمة المرور admin. تثبيت نسخة من openwrt. يمكنك التواصل مع اردوينو مع المسلسل /dev/ttyS0 باود 57600.ربط كاميرا ويب يولد تيار في http://192.168.1.150:8080/?action=stream

It is too hard to find relevant information on the boards I could find no link to the Keyes web site and limited information was available for the module itself It has limited breakout capability, only 2 ETH connections are available from the module the SPI and PCM lines are also unavailable I could not find any links to the file images for the onboard Linux system Pinout is available here http://product.dzsc.com/product/1049117-20141103053606155.html but its not even clear where pin 1 is on the connectors or which connector is which Finally, the board arrived with a broken antenna so it gets only 3 stars

It is too hard to find relevant information on the boards I could find no link to the Keyes web site and limited information was available for the module itself It has limited breakout capability, only 2 ETH connections are available from the module the SPI and PCM lines are also unavailable I could not find any links to the file images for the onboard Linux system Pinout is available here http://product.dzsc.com/product/1049117-20141103053606155.html but its not even clear where pin 1 is on the connectors or which connector is which Finally, the board arrived with a broken antenna so it gets only 3 stars

It is too hard to find relevant information on the boards I could find no link to the Keyes web site and limited information was available for the module itself It has limited breakout capability, only 2 ETH connections are available from the module the SPI and PCM lines are also unavailable I could not find any links to the file images for the onboard Linux system Pinout is available here http://product.dzsc.com/product/1049117-20141103053606155.html but its not even clear where pin 1 is on the connectors or which connector is which Finally, the board arrived with a broken antenna so it gets only 3 stars

No doc!!!

No doc!!!

No doc!!!