Tested, work well! Comes with Hall Sensor! But be careful, connect the Battery minus also to the frame of the Engine.

Tested, work well! Comes with Hall Sensor! But be careful, connect the Battery minus also to the frame of the Engine.

Tested, work well! Comes with Hall Sensor! But be careful, connect the Battery minus also to the frame of the Engine.

Excellent item . Connect the two wire out put to 3 volts .The ground wire is connected to the negative wire on the two wire output. The single wire output is connected to the spark plug.Finaly connect the hall sensor the three wire output. When you pass a magnet past the sensor you will get a spark!

Excellent item . Connect the two wire out put to 3 volts .The ground wire is connected to the negative wire on the two wire output. The single wire output is connected to the spark plug.Finaly connect the hall sensor the three wire output. When you pass a magnet past the sensor you will get a spark!

Excellent item . Connect the two wire out put to 3 volts .The ground wire is connected to the negative wire on the two wire output. The single wire output is connected to the spark plug.Finaly connect the hall sensor the three wire output. When you pass a magnet past the sensor you will get a spark!