استعراضات العملاء

أكتب مراجعة
  • كل المراجعات (9)
  • صورة (0)
  • فيديو (0)
  • بداية الكل
    • بداية الكل(9)
    • 5 بدأ(9)
    • 4 بدأ(0)
    • 3 بدأ(0)
    • 2 بدأ(0)
    • 1 بدأ(0)
الترتيب حسب:
أفضل مراجعة
  • أفضل مراجعة
  • الأكثر أفاده
  • آخر
المراجعات من بلدك فقط (Iraq)
|
إظهار النسخة الأصلية

تمت ترجمة جزء من المراجعة تلقائيًا.

  • 02/04/2021

    prima aandrijf as. dacht dat hij 12 cm lang was maar is 8cm lang. hoef ik hem niet zelf in te korten ,mooi 👍

    تعليقات
    إظهار النسخة الأصلية
  • 01/10/2021

    أشياء رائعة، استبدال أعمدةي البالية، أحسنت صنعًا.

    تعليقات
    إظهار النسخة الأصلية
  • 26/01/2021

    منتج جيد

    تعليقات
    إظهار النسخة الأصلية
  • 13/11/2020

    التسليم السريع جداً مناسب بشكل مثالي

    تعليقات
    إظهار النسخة الأصلية
  • 25/10/2019

    This is a good driveshaft. It is large in diameter, very durable. For reliable fixation of the bosses when connecting to the mating axles, there are through holes on both sides through which, when installing the cardan, sufficiently thick locking pins are inserted and screwed in (spare pins are not included in this cardan shaft, unfortunately). It should be noted that the price of this shaft is less than that of other sellers. The only drawback of the design, in my opinion, is the too large gap between the moving parts: a square rod and a universal joint housing, inside of which a longitudinal movement of the square rod is provided. I am sure that reducing this gap by half would not lead to a deterioration of work, including, given the coefficients of thermal expansion of metal parts heated up during operation and lubrication. But reducing the gap would provide a positive effect of reducing the angular idle of the universal joint. This would reduce the jerking and noise of the gimbal drive during operation, especially during sudden movements, braking and changing the direction of movement of the RC model.

    تعليقات
    إظهار النسخة الأصلية
  • 24/06/2019

    Well, I have to update my review. I finally got the all part off my 802 rc hennt and the new part does fit. A little different than the old one but, got the lock screws off and put some dri film oil on them and they fit. The truck runs like it did before and looks really good. I have several more spare parts coming so I don't have to for them to come in. The parts don't just slide off, you have to work at them and I rather feel them really fitting on each other. Well it is back off to running my HG 802 with the new trans sleeve.

    تعليقات
    إظهار النسخة الأصلية
  • 24/06/2019

    The piecee package came on time, but it was the wrong piece. It was full of water and the piece was rusty. Had to first soak it in a dri fill lube and then clean it off. I then notice the piece did not look like the piece that was still on there. The lock nuts are so tight that I couldn't [pull the off of the truck. I am going to use some lubricant to see if I can get them loose. I wish that for the amount of money that one spent on the truck, One can at least repair it. I need something with some torque to open them up.

    تعليقات
    إظهار النسخة الأصلية
  • 18/07/2019

    Excelente!!!

    تعليقات
    إظهار النسخة الأصلية
  • 24/04/2019

    le ok.

    تعليقات
    إظهار النسخة الأصلية
Show:

    مجموع 0 الصفحات

    انتقل إلى صفحة

    قد تكون مهتمة ايضا بـ

    recommendation for you
    • US$9.99
    • US$25.59
    • US$3.89
    • US$13.99
    • US$7.99
    • US$11.33
    • US$6.99
    • US$49.65
    • US$14.51
    • US$550.99
    • US$32.99
    • US$7.59
    • US$12.99
    • US$12.99
    • US$199.00
    • US$18.99
    • US$39.99
    • US$8.47