استعراضات العملاء

أكتب مراجعة
  • كل المراجعات (1320)
  • صورة (133)
  • فيديو (2)
  • بداية الكل
    • بداية الكل(1320)
    • 5 بدأ(1279)
    • 4 بدأ(34)
    • 3 بدأ(4)
    • 2 بدأ(1)
    • 1 بدأ(2)
الترتيب حسب:
أفضل مراجعة
  • أفضل مراجعة
  • الأكثر أفاده
  • آخر
المراجعات من بلدك فقط (Saudi Arabia)
|
إظهار النسخة الأصلية

تمت ترجمة جزء من المراجعة تلقائيًا.

  • 03/09/2021

    تم شحن الطلب ووصل بسرعة كبيرة في تغليف جيد. المنتج يفعل ما يعد به وله سعر جيد جداً تُظهر الشرائح الرقمية درجة حرارة بدرجات سيلسية. قد يظهر انحراف صغير يتراوح بين 2-3 درجات وهو ليس بالأمر الجلل، لأنه يمكنك إصلاحه باستخدام وضع التشغيل P4 (انظر يدويًا في http://www.kelco.rs/katalog/images/17670.pdf). وجدت أيضًا فرقًا بنحو درجتين باستخدام ANING AN8002 RMS الرقمية الحقيقية 6000 العد متعدّد التيار المتردد/DC اختبار درجة حرارة مقاومة التيار الكهربائي ℃/℉ (https://www.bangod.com/ANINGING -AN8002-Digtal-Ture-RMS-Multimeter-ACDC-current-Vrequence-Resistance-Temp-Tester-p-1145700.html?p=P82816 5195951201606J) لمقارنة النتائج لوضعها على درجة الحرارة المطلوبة استخدمت الأزرار الثلاثة أولاً ضغطت على الزر الأيسر (الواحد القريب من الترحيل) للدخول في وضع الإعداد والأجزاء الرقمية بدأت في الوميض... ثم استخدمت الزرين الآخرين لضبط وخفض قيمة درجة الحرارة المطلوبة وأخيراً، من خلال الضغط على الزر الأيسر (Set UP) قمت بتخزين القيمة المطلوبة. يمكنك العثور على عمليات أخرى كثيرة في الدليل!!! أنا بالتأكيد أوصي بهذا المستشعر - منظم الحرارة!

    تعليقات
    إظهار النسخة الأصلية
  • 22/07/2021

    المنتج كما هو مكتوب ولكن لم يتم اختباره بعد

    تعليقات
    إظهار النسخة الأصلية
  • 20/01/2021

    حَسَناً 👍

    تعليقات
    إظهار النسخة الأصلية
  • 05/09/2017

    Première photo la température ambiante. Deuxième photo Appui court sur set pour entrer la température de consi!gne 23.2 . Troisième photo appuie long puis + pour sélectionner P1 qui est l hysteresis. Appui sur set pour entrer l hysteresis ici 0,5 (2 degrés la valeur par défaut) attendre 5seconde pour le retour à l affichage. Mettre son doigt sur la sonde pour monter en température a 23.7 (23,2 + 0,5 hysteresis) la led s allume et le relai colle. On retire le doigt de la sonde la température baisse. La led s éteindra à la température de consigne 23,2

    تعليقات
    إظهار النسخة الأصلية
  • 01/08/2017

    I bought 3 kits. Great thermostat at a small price. For usage documentation: www.kelco.rs/katalog/images/17670.pdf Test parameters: P0 = C (default), P1 = 0.8 ° C (hysteresis), limit temperature = 33 ° C. Photo 2: error - probe not connected. Photo 3: led ON - closed relay contact - temperature below set maximum limit. Photo 4: led OFF - open relay contact - lower temperature than set hysteresis limit.

    تعليقات
    إظهار النسخة الأصلية
  • 20/09/2018

    Order was shipped and arrived very fast in good packaging. This device does what it promises for a very good price. I tested it and found out that digital indication is at Celcious degrees and there is a small deviation of about 2 degrees that is not a big deal for the type and purpose of usage. Setting up is really easy using the 3 buttons. By pressing the left button (the one close to relay) you are enterring setup and digital segments are flashing ... In this status you can use the 2 other buttons to set up and down the value of desired triggering temperature ... Then by pressing the left button you store the value. JUST that simple !!! I surely recommend this product and i have already ordered more !

    تعليقات
    إظهار النسخة الأصلية
  • 20/09/2018

    Order was shipped and arrived very fast in good packaging. This device does what it promises for a very good price. I tested it and found out that digital indication is at Celcious degrees and there is a small deviation of about 2 degrees that is not a big deal for the type and purpose of usage. Setting up is really easy using the 3 buttons. By pressing the left button (the one close to relay) you are enterring setup and digital segments are flashing ... In this status you can use the 2 other buttons to set up and down the value of desired triggering temperature ... Then by pressing the left button you store the value. JUST that simple !!! I surely recommend this product and i have already ordered more !

    تعليقات
    إظهار النسخة الأصلية
  • 28/12/2016

    The module runs on a 12V DC supply and draws about 20mA or 70mA when the relay is energised. Here's the programming info: A brief press of SET enters the main temperature adjustment mode with the current set temperature flashing. This can be adjusted with the UP/DN buttons, and holding them will make them auto-repeat. When finished adjusting, the unit will store your new setting and revert back to normal operation after several seconds. Holding down SET for about 5 seconds will enter programming mode. You can step through the program parameters from P0 to P6 with the UP/DN buttons and use SET to select them. P0 Selects cooling mode or heating mode.In cooling mode (C) the relay will energise and close the contacts when the probe temperature is above the set temperature.In heating mode (H) the relay will energise and close the contacts when the probe temperature is below the set temperature. P1 Allows you to set a hysteresis value between 0.1 to 15 degrees.The hysteresis value is to prevent the relay chattering ON and OFF when the probe is wavering around the set temperature point.For instance, with hysteresis set to the default of 2 degrees, when in cooling mode and the temperature is set to 25 degrees, the relay will activate as soon as that temperature is reached, but not deactivate until the temperature is brought down to 23 degrees (25 degrees minus a hysteresis value of 2 degrees)When in heating mode the relay would activate as soon as the temperature fell to 25 degrees, but would remain on until it reached 27 degrees. (25 degrees plus a hysteresis value of 2 degrees.) P2 Highest temperature limit. Set to 110 degrees by default. This is used to limit the upper temperature than can be set. P3 Lowest temperature limit. Set to -50 degrees by default. This sets the lowest temperature than can be set. P4 Probe correction. Very neat. Allows you to calibrate the temperature the probe is sensing by +7.0 to -7.0 in tenth of a degree increments. P5 Relay energisation delay of between 0 to 10 minutes to limit fast cycling of equipment like compressors. After setting this function the unit must be powered off and on again for the change to take effect. When I tested this it switched after about 35 seconds with a delay of "1" and about 1:40 with a delay of "2". P6. This is an over-temperature limit that turns off the relay and displays a row of dashes on the display.

    تعليقات (2)
    إظهار النسخة الأصلية
  • 27/08/2017

    It works really well as promised. I was surprised by the various settings you can change to tune this thermostat. Maybe it needs to be calibrated first I noticed a difference of 2-3 degrees but that's okey!

    تعليقات
    إظهار النسخة الأصلية
  • 24/06/2016

    L'unica cosa negativa e' il tempo di attesa per riceverlo per il resto tutto ok .Termostato molto versatile e settabile per varie funzioni . Allego foto per programmazione in quanto quella che ho trovato nella confezione e' in cinese. Una contenitore dedicato magari trasparente sarebbe stato gradito .

    تعليقات (1)
    إظهار النسخة الأصلية
Show:

    مجموع 0 الصفحات

    انتقل إلى صفحة

    قد تكون مهتمة ايضا بـ

    recommendation for you
    • S.R.36.85
    • S.R.40.97
    • S.R.28.65
    • S.R.34.75
    • S.R.68.86
    • S.R.205.01
    • S.R.65.58
    • S.R.11.18
    • S.R.69.66
    • S.R.53.26
    • S.R.12.25
    • S.R.45.05
    • S.R.36.85
    • S.R.45.05
    • S.R.41.05
    • S.R.98.39
    • S.R.41.66
    • S.R.20.07