الشحن الى United Kingdom , USD
أعلى مراجعة إيجابية لـ %s على Banggood, تسوق أفضل %s بأقل سعر على Banggood. تصفح المراجعات الإيجابية الأكثر إفادة لـ %s قبل الشراء., ألعاب أرسي ، رياضة ممتعة ، أزياء ، إلكترونيات شعبية
JPDuhen 11/01/2019
To flash, connect GPIO0 and GPIO2 to GND, remove the camera, power it with 3.3V, not 5V. The board needs to be programmed with ESP-IDF as explained in details in Github, https://github.com/donny681/ESP32_CAMERA_QR and there’s no Arduino IDE support. So if you’r not comfortable with using Espressif development framework better skip this board. The demo code takes a QR code, and outputs it as ASCII code in the serial console.
8
تعليقات (1)
عرض
  • Mark Hurley Ihad to power it with 5V to get the camera working properly. And this is compatible with Arduino IDE -- just be sure to add ESP setup beforehand.

    رد 08/05/2019
قياس مدى الرضا

حمل التطبيق للحصول على كوبون خصم بقيمة 10% حصرياً