https://youtu.be/atVYkBZwV08

https://youtu.be/atVYkBZwV08

https://youtu.be/atVYkBZwV08

Simple little light sensor switch. The unit switches on and off (with a delay of about 7 seconds) a load dependent on the ambient light level. This unit switches the neg feed to the load (max 5A untested) but there is another version that switches the positive. The input Voltage range is wide, 8-50V but I have only tested at 12V. The light levels for triggering appear reasonable. From what I can see the unit itself is not waterproof but the front 'bolt through' sensor section is and is supplied with 2 rubber washers to ensure the seal to a box or similar. Self power of the unit appears very low and does not register on the simple bench supply current meter.

Simple little light sensor switch. The unit switches on and off (with a delay of about 7 seconds) a load dependent on the ambient light level. This unit switches the neg feed to the load (max 5A untested) but there is another version that switches the positive. The input Voltage range is wide, 8-50V but I have only tested at 12V. The light levels for triggering appear reasonable. From what I can see the unit itself is not waterproof but the front 'bolt through' sensor section is and is supplied with 2 rubber washers to ensure the seal to a box or similar. Self power of the unit appears very low and does not register on the simple bench supply current meter.

Simple little light sensor switch. The unit switches on and off (with a delay of about 7 seconds) a load dependent on the ambient light level. This unit switches the neg feed to the load (max 5A untested) but there is another version that switches the positive. The input Voltage range is wide, 8-50V but I have only tested at 12V. The light levels for triggering appear reasonable. From what I can see the unit itself is not waterproof but the front 'bolt through' sensor section is and is supplied with 2 rubber washers to ensure the seal to a box or similar. Self power of the unit appears very low and does not register on the simple bench supply current meter.

Ottimo acquisto

Ottimo acquisto

Ottimo acquisto

good product

good product

good product

Label instructions are clear. But I dont know why there is an screw and caskter on the lens. Is there something I could add to it?

Label instructions are clear. But I dont know why there is an screw and caskter on the lens. Is there something I could add to it?

Label instructions are clear. But I dont know why there is an screw and caskter on the lens. Is there something I could add to it?

It works as expected.

It works as expected.

It works as expected.

Easy to fit into most lights

Easy to fit into most lights

Easy to fit into most lights

حسنا.

OK.

حسنا.

وصلت بأمان وفي وقت أبكر مما كان متوقعاً سيلائم الزنبرك عند تركيب التزيين الجديد

Arrived safely and earlier than expected. Will fit in the spring when the new decking is installed

وصلت بأمان وفي وقت أبكر مما كان متوقعاً سيلائم الزنبرك عند تركيب التزيين الجديد

شكراً لك خدمة سريعة جداً

Merci service très rapide

شكراً لك خدمة سريعة جداً