الشحن الى United Kingdom , USD

استعراضات العملاء

4.87 من 5
أكتب مراجعة
  • كل المراجعات (31)
  • صورة (6)
  • فيديو (0)
  • بداية الكل
    • بداية الكل(31)
    • 5 بدأ(27)
    • 4 بدأ(4)
    • 3 بدأ(0)
    • 2 بدأ(0)
    • 1 بدأ(0)
الترتيب حسب:
أفضل مراجعة
  • أفضل مراجعة
  • الأكثر أفاده
  • آخر
    • عموما:
    • السعر:
    • جودة:
    • مظهر:

    2019-09-19 20:33:03

    Happy with quality, short of 144 by about 3 or 4. Works well with Atmel328P based micro-controller, external power supply and FastLed library.

    تعليقات
    • عموما:
    • السعر:
    • جودة:
    • مظهر:

    2019-11-12 12:11:26

    tested one strip so far, all led's work ok for the price, but not the best quality : - the strips i received are shorter than 1m and therefore have only 142 led's on each strip - the strips are cut in half and soldered together, so not the same distance between the leds large packaging for little content

    تعليقات
    • عموما:
    • السعر:
    • جودة:
    • مظهر:

    2019-09-27 09:11:54

    Working as it should

    تعليقات
  • phb
    • عموما:
    • السعر:
    • جودة:
    • مظهر:

    2019-09-03 05:35:49

    As advertised. Have not tested it yet but seems okay.

    تعليقات
    • عموما:
    • السعر:
    • جودة:
    • مظهر:

    2019-08-08 20:21:19

    I received a strip that had been spliced together with 2 remnants. I'm sure it will work, but it throws of the dimension of the LED strip which is very important for my purpose. I wish they had sent me a strip that was one continuous strip with the proper dimension.

    تعليقات
    • عموما:
    • السعر:
    • جودة:
    • مظهر:

    2019-08-08 10:37:02

    Everything fine and as ordered

    تعليقات
    • عموما:
    • السعر:
    • جودة:
    • مظهر:

    2019-10-14 10:33:33

    I've just received these LED strips. They are nice looking LEDs, but there are NOT 144 LEDS in each strip as expected. Instead there are only 142! Luckily they'll do for what I intended, but if you were planning to make a 12 x 12 matrix, you can't. Testing them on an arduino is simple. Download the NeoPixel library and use the 'strandtest' sketch. Use pin 6 for data and change the length parameter to '142' as below: Adafruit_NeoPixel strip = Adafruit_NeoPixel(142, PIN, NEO_GRB + NEO_KHZ800); If

    تعليقات
    • عموما:
    • السعر:
    • جودة:
    • مظهر:

    2019-11-11 13:29:19

    thanks for all

    تعليقات
  1 2 3 4  

قد تكون مهتمة ايضا بـ

قياس مدى الرضا

حمل التطبيق للحصول على كوبون خصم بقيمة 10% حصرياً