الشحن الى United Kingdom , USD
أعلى مراجعة إيجابية لـ %s على Banggood, تسوق أفضل %s بأقل سعر على Banggood. تصفح المراجعات الإيجابية الأكثر إفادة لـ %s قبل الشراء., ألعاب أرسي ، رياضة ممتعة ، أزياء ، إلكترونيات شعبية
Wayne Miller 11/08/2021
I have installed this on an Ender 3 V2 and it works well. There are no instructions, but you can find instructions on UTube that are very close. I've enclosed a picture of the extruder output, you will notice on the left of the picture under the blue feed handle there is not a brass screw in for the feed tube. Instead this mod uses a black "push in" plastic tube holder. The tube is pushed into the black tube holder and kept in place with the blue clip. Also, there is no washer under the spring loaded feed arm, and when you tighten the screw in the feed arm, it will not bind. Hopefully someone will post complete instructions to install this. If you are mechanically inclined, and view the UTube video, there should be no problem installing this. ADMINISTRATOR: Please note, I tried to upload a .JPG file and it would not work, your site only takes .jpg in lower case - this should be fixed.
2
تعليقات
عرض
قياس مدى الرضا

حمل التطبيق للحصول على كوبون خصم بقيمة 10% حصرياً