إطار الكاميرا E mount لكاميرا Eachine TX01 TX02 FPV NTSC E010 E010C E010S Blade Inductrix Tiny Whoop
تمت ترجمة جزء من المراجعة تلقائيًا.
سعيده
The front hole is OK, but the two side hole is just decoration for me. It needs a very long and skinny screws, what I don't have, so I fixed it with a rubber, wich is hold the cam in place well. Overall it's do the job, and holds the camera angle also in good position!
Print quality is a little scratchy, but it fit fine on my Furi-Whoop It's taken some tumbles from higher than one floor of my apartment and it's still holding together. You will need to add a cable tie, or a dab of hot glue to hold the camera in proper, but otherwise it's a good fit. If you're thinking about a custom colour, be aware that sharpie will not stick. Try paint or dye.
I used this mount for another frame and it worked pretty well. I didn't use the holes of the mount, but now the camera is stable. Frame is: 90mm Carbon Fiber DIY Micro Mini FPV Quadcopter Frame Kit 2mm Thickness Support 720 Coreless Motor After a month the mount cracked, better get a printer and print your own!
أحبه ممتاز FPV AIO الكاميرا وvtx n صورة ممتازة منه.
к сожалению не подошла по размеру к моей камере, но всегда можно подрезать и посадить на суперклей)
Òtima mercadoria, ótima qualidade, gostei muito da mercadoria, já voei usando esse suporte e ele é muito bom, parabéns.
Крепление крепкое, держит отлично. Очень похоже на печать 3D принтером.
مقالتي وصلت
Good camera. Has a little fisheye effect but not disturbing. good quality for a good prive