استعراضات العملاء

أكتب مراجعة
  • كل المراجعات (75)
  • صورة (5)
  • فيديو (0)
  • بداية الكل
    • بداية الكل(75)
    • 5 بدأ(72)
    • 4 بدأ(2)
    • 3 بدأ(0)
    • 2 بدأ(0)
    • 1 بدأ(1)
الترتيب حسب:
أفضل مراجعة
  • أفضل مراجعة
  • الأكثر أفاده
  • آخر
المراجعات من بلدك فقط (Jordan)
|
إظهار النسخة الأصلية

تمت ترجمة جزء من المراجعة تلقائيًا.

  • 21/11/2016

    It took some time to make it work. This is things all you need : https://learn.adafruit.com/adafruit-4-channel-adc-breakouts I2C adressing is a bit tricky pay attention to wiring and code compatibility. Also keep wires short and use shielded case for your project if it is possible.

    تعليقات
    إظهار النسخة الأصلية
  • 23/08/2015

    Easy to integrate in an Arduino design Good library available: https://github.com/adafruit/Adafruit_ADS1X15 Documentation available: https://www.adafruit.com/datasheets/ads1115.pdf

    تعليقات
    إظهار النسخة الأصلية
  • 11/02/2020

    جودة ممتازة، تبدو قوية، كما هو موصوف

    تعليقات
    إظهار النسخة الأصلية
  • 09/04/2019

    Great and easy to use 4 channel Analog to Digital Convertor. Very good precision with 16 bit. As an other reviewer said, you can't have enough of them.

    تعليقات
    إظهار النسخة الأصلية
  • 24/05/2016

    I had to remove some of the pull up resistors on my boards as I am using 3 in a row Leaving the resistors would overload the I2C interface, something to remember when using multiple I2C modules on the same interface I also had to set the address as described in the IC documentation and now I have 3 of these devices connected together to read a string of 9 gas sensors The additional 3 lines were connected via resistor divider to the power supplies 1 to 3v3 using 2 10 k resistors as divider, 1 to the 5 v supply for the sensors, also via 10 resistor divider and 1 to the unregulated feed from the PSU but this is 90k & 10 k resistor divider, giving a reading of 1/10 the PSU voltage which can be between 7 and 30 volts in this case These are excellent little devices

    تعليقات
    إظهار النسخة الأصلية
  • sariz96
    HU
    14/05/2016

    I tried both of two modules with Arduino Nano mc and "Adafruit_ADS1015" ( https://github.com/adafruit/Adafruit_ADS1X15 ). The read values are correct, but the channel selection values (0 - 4) do not match the inputs (A0 - > 1, A1 -> 2, A2 -> 3, A3 -> 0). So, I can correct it in my own software, it is not fatal problem. Best regards, Z.

    تعليقات
    إظهار النسخة الأصلية
  • 15/08/2015

    Good ADC. I use it to read strain gages, and it work as supposed. The sample rate, 16 bit and low noise makes it usable for professional applications. Great value for the buck!

    تعليقات
    إظهار النسخة الأصلية
  • 04/07/2017

    This ADC has good resolution and for now it's working properly. I checked the documentation that some other reviewers proposed; thank you all for that. I am also considering buying 24-bit version.

    تعليقات
    إظهار النسخة الأصلية
  • 23/03/2017

    Everything as expected, recommended.

    تعليقات
    إظهار النسخة الأصلية
  • jpwVIP3
    FR
    28/06/2019

    parfait

    تعليقات
    إظهار النسخة الأصلية
Show:

    مجموع 0 الصفحات

    انتقل إلى صفحة

    قد تكون مهتمة ايضا بـ

    recommendation for you
    • US$11.99
    • US$3.99
    • US$9.99
    • US$4.99
    • US$9.99
    • US$10.99
    • US$8.99
    • US$16.00
    • US$17.99
    • US$12.99
    • US$61.41
    • US$33.62
    • US$38.71
    • US$15.99
    • US$39.99
    • US$16.59
    • US$42.99
    • US$8.99