استعراضات العملاء

5 من 5
أكتب مراجعة
  • كل المراجعات (48)
  • صورة (6)
  • فيديو (0)
  • بداية الكل
    • بداية الكل(48)
    • 5 بدأ(48)
    • 4 بدأ(0)
    • 3 بدأ(0)
    • 2 بدأ(0)
    • 1 بدأ(0)
الترتيب حسب:
أفضل مراجعة
  • أفضل مراجعة
  • الأكثر أفاده
  • آخر
  • November-09 2020 03:27:07

    The board is a direct replacement for the ender series printers. It works out the box if u put in the sd card in it to flash it. I don't know if there was a firmware already flashed. it is not as silent as i hope it to be, my previous setup with dumpers for motors was slightly silenter.

    تعليقات
  • October-30 2020 22:24:11

    Excelente placa, solo hizo falta un poquito de paciencia para poner positivo y negativo que viene de la fuente (cable muy corto) por lo demás una vez instalada ya estaba trabajando sin ningún problema, al no mover la cama no tuve que nivelar nada solo encender hubicar el archivo a imprimir y ya estaba imprimiendo, mucho silencio, creo que despues de un año con la placa normal estoy extrañando sus sonidos de movimientos :)

    تعليقات
  • November-05 2020 04:11:35

    The board is very nice. Runs cool and silent. Unfortunately my first one failed 1 day after receiving it. Still dealing with BangGood service to get a replacement on that....... I bought a identical replacement board (It cost twice the price locally :-() The replacement has been running nicely for the last week. Installation is easy and there is a tonne of YouTube and Wiki resources. The stick on heats sinks are likely to fall off if you bump them so you need to handle with care once you stick

    تعليقات
  • November-11 2020 03:06:06

    Its a very nice board. In fact this is the second one I bought as a spare just in case I blew something up when modding the printer. :-) The box came ripped but the board was fine. Maybe bang good method of sending everything in plastic bags is not such a great idea.

    تعليقات
  • August-24 2020 08:21:23

    Llego a los 20 días de la compra. Embalaje en buen estado y solo queda probar.

    تعليقات
  • November-26 2020 23:17:53

    havnt installed yet but came perfect condition

    تعليقات
  • September-13 2020 13:40:06

    Great board, overall. Combines the silence of the Creality 1.5 with 32 bit capabilities. Of course, right after I purchased it Creality made the shift to 32 bit boards. However, this is still a really solid board and pairs well with the TFT35 Touch Screen upgrade I also purchased. One word of caution - Creality hot-melt glues their connectors to their original boards, so the first removal of the original can be a bit of a pain. I had already upgraded to a Creality 1.5 on my Ender 3 Pro, however, so

    تعليقات
  • November-01 2020 12:17:48

    Astonished at how good an upgrade this was! Arrived quickly and nicely packaged. I installed this on my Anet A8** and the difference is incredible compared to the stock board on that machine. Everything sounds so much smoother and you can barely hear the stepper motors any more. The loudest thing on my printer now is the blower fan. The fan now annoys me so will be replacing that with something quieter next. I don't hesitate to recommend this product. For the price it's a no-brainer! **It's not

    تعليقات
  • September-17 2020 15:59:25

    Item arrived fast and well packaged It is a very easy swap from the original 8bit ender 3 pro board check the manual for the connections to be sure. I wasn't careful and I plugged my bltouch the wrong way, so I fried my bltouch and had to bought another one. Fortunately the mainboard is ok I used the installed firmware to test it but after that I downloaded the latest Marlin bugfixed and configured it to use bltouch etc with the help of youtube videos The only bad thing I realised compared to the

    تعليقات
  • September-13 2020 16:01:16

    Excellent board! My Ender 5 pro is transformed! Cleary superior to the "silent" board that came with the printer. The stm32 micro controller has enough memory to use any function I could think of in marlin 2.xx and the stepper drivers are truly silent. The only gripe I have is that the fan pwm uses a low frequency, which result in very audible motor whine when the fans are run below 100% but this might be fixed in future versions of marlin. All in all an excellent product!

    تعليقات
Show:

    Go to page

    Go

    قد تكون مهتمة ايضا بـ

    recommendation for you
    • US$51.49
    • US$64.30
    • US$28.89
    • US$12.38
    • US$22.99
    • US$86.76
    • US$84.13
    • US$44.99
    • US$88.99
    • US$163.17
    • US$65.99
    • US$79.99
    • US$26.69
    • US$24.89
    • US$59.99
    • US$88.99
    • US$4.46
    • US$23.99