Firstly this little guy is wicked as small as full 3” setup can be! I was a bit worried since I saw a review that said the HGLRC 20x20 stack wouldn’t fit but this is only partially true. I’ve managed to fit a full HGLRC setup into this little guy and it’s definitely worth the trouble. In order to fit everything you have to turn the ESC and the FC 90 degrees clockwise. this will allow everything to fit for the most part except for the battery terminal which is now located in the back. To fix this problem I took a small file to the standoff after measuring where it touched the board. Take off enough to accommodate the board and your all set. I also bought 25mm standoff’s which are 5mm longer than the stock ones. Once all of this is accomplished it makes a wicked fast and smooth quadcopter on 1106 6000kv motors. At some point I want to upgrade to 1407 motors and 4s batteries. Currently getting 4/5min flights.

Firstly this little guy is wicked as small as full 3” setup can be! I was a bit worried since I saw a review that said the HGLRC 20x20 stack wouldn’t fit but this is only partially true. I’ve managed to fit a full HGLRC setup into this little guy and it’s definitely worth the trouble. In order to fit everything you have to turn the ESC and the FC 90 degrees clockwise. this will allow everything to fit for the most part except for the battery terminal which is now located in the back. To fix this problem I took a small file to the standoff after measuring where it touched the board. Take off enough to accommodate the board and your all set. I also bought 25mm standoff’s which are 5mm longer than the stock ones. Once all of this is accomplished it makes a wicked fast and smooth quadcopter on 1106 6000kv motors. At some point I want to upgrade to 1407 motors and 4s batteries. Currently getting 4/5min flights.

Firstly this little guy is wicked as small as full 3” setup can be! I was a bit worried since I saw a review that said the HGLRC 20x20 stack wouldn’t fit but this is only partially true. I’ve managed to fit a full HGLRC setup into this little guy and it’s definitely worth the trouble. In order to fit everything you have to turn the ESC and the FC 90 degrees clockwise. this will allow everything to fit for the most part except for the battery terminal which is now located in the back. To fix this problem I took a small file to the standoff after measuring where it touched the board. Take off enough to accommodate the board and your all set. I also bought 25mm standoff’s which are 5mm longer than the stock ones. Once all of this is accomplished it makes a wicked fast and smooth quadcopter on 1106 6000kv motors. At some point I want to upgrade to 1407 motors and 4s batteries. Currently getting 4/5min flights.

nice frame very solid. only Racerstar tattoo mini s 25x4 does not fit between spacers so I had to modify frame.

nice frame very solid. only Racerstar tattoo mini s 25x4 does not fit between spacers so I had to modify frame.

nice frame very solid. only Racerstar tattoo mini s 25x4 does not fit between spacers so I had to modify frame.