شونر قاد تريبر ماشيت كان

schöner led Treiber macht was er soll

شونر قاد تريبر ماشيت كان

My second order for these. Bought 3 more this time. Perfect for powering a 30W UV LED from a a 3 cell LIpo (11.1V) or or a 4 cell LIpo (14.8V).

My second order for these. Bought 3 more this time. Perfect for powering a 30W UV LED from a a 3 cell LIpo (11.1V) or or a 4 cell LIpo (14.8V).

My second order for these. Bought 3 more this time. Perfect for powering a 30W UV LED from a a 3 cell LIpo (11.1V) or or a 4 cell LIpo (14.8V).

Exactly what I needed and now I can use my UV 30W LED to check for florescence anywhere using a 3 cell LiPo. My 30W LED is attached to a heatsink with a 12V fan and now I can also power both the LED and the fan using a single 12V power supply when using it where AC Power is available. Required current (for LED + fan) at 12V is 2.7A or 2.97A with a 3 cell LIpo (11.1V) or 2.14A with a 4 cell LIpo (14.8V). Also, nice to have a schematic provided for this module.

Exactly what I needed and now I can use my UV 30W LED to check for florescence anywhere using a 3 cell LiPo. My 30W LED is attached to a heatsink with a 12V fan and now I can also power both the LED and the fan using a single 12V power supply when using it where AC Power is available. Required current (for LED + fan) at 12V is 2.7A or 2.97A with a 3 cell LIpo (11.1V) or 2.14A with a 4 cell LIpo (14.8V). Also, nice to have a schematic provided for this module.

Exactly what I needed and now I can use my UV 30W LED to check for florescence anywhere using a 3 cell LiPo. My 30W LED is attached to a heatsink with a 12V fan and now I can also power both the LED and the fan using a single 12V power supply when using it where AC Power is available. Required current (for LED + fan) at 12V is 2.7A or 2.97A with a 3 cell LIpo (11.1V) or 2.14A with a 4 cell LIpo (14.8V). Also, nice to have a schematic provided for this module.

جيد جداً

Very Good

جيد جداً

This module is NOT suitable for 60V/5A as advertised. Without changing the current parameters with the current sense resistors you can use it only up to 40V. However If you plan tu use it at 20-30 Volts it delivers up to 2.5 constantly.

This module is NOT suitable for 60V/5A as advertised. Without changing the current parameters with the current sense resistors you can use it only up to 40V. However If you plan tu use it at 20-30 Volts it delivers up to 2.5 constantly.

This module is NOT suitable for 60V/5A as advertised. Without changing the current parameters with the current sense resistors you can use it only up to 40V. However If you plan tu use it at 20-30 Volts it delivers up to 2.5 constantly.

ottimo

ottimo

ottimo