These tri blades are very cool looking, but unfortunately that's all you are going to get from them. I purchased these for my Hubsan micro quads and they drastically reduced flight time and overall performance. Stick with the 2 blades.

These tri blades are very cool looking, but unfortunately that's all you are going to get from them. I purchased these for my Hubsan micro quads and they drastically reduced flight time and overall performance. Stick with the 2 blades.

These tri blades are very cool looking, but unfortunately that's all you are going to get from them. I purchased these for my Hubsan micro quads and they drastically reduced flight time and overall performance. Stick with the 2 blades.

I got these to experiment with options for an unmodified QX95. These props stay on nicely - no need for glue, they are a nice tight fit. They can't be pushed down all the way with some prop savers as the blades touch, but the props actually stay on even if not pushed down all the way. They are a lot quieter than stock QX95 blades and great for quiet flying indoors. QX95 motors run hot and flight time is noticeably less, and the quad is noticeably less responsive to throttle. Flying up to go over obstacles requires thinking ahead. One blade measures ~23mm from the hub, so I'd call these 46mm blades.

I got these to experiment with options for an unmodified QX95. These props stay on nicely - no need for glue, they are a nice tight fit. They can't be pushed down all the way with some prop savers as the blades touch, but the props actually stay on even if not pushed down all the way. They are a lot quieter than stock QX95 blades and great for quiet flying indoors. QX95 motors run hot and flight time is noticeably less, and the quad is noticeably less responsive to throttle. Flying up to go over obstacles requires thinking ahead. One blade measures ~23mm from the hub, so I'd call these 46mm blades.

I got these to experiment with options for an unmodified QX95. These props stay on nicely - no need for glue, they are a nice tight fit. They can't be pushed down all the way with some prop savers as the blades touch, but the props actually stay on even if not pushed down all the way. They are a lot quieter than stock QX95 blades and great for quiet flying indoors. QX95 motors run hot and flight time is noticeably less, and the quad is noticeably less responsive to throttle. Flying up to go over obstacles requires thinking ahead. One blade measures ~23mm from the hub, so I'd call these 46mm blades.

Original specification is much better than 4-leaf prop Sounds good and flight time has increased by 20-30 seconds. The bee case is fitted and the 3-leaf prop is not interfering Very satisfied and highly recommended

Original specification is much better than 4-leaf prop Sounds good and flight time has increased by 20-30 seconds. The bee case is fitted and the 3-leaf prop is not interfering Very satisfied and highly recommended

Original specification is much better than 4-leaf prop Sounds good and flight time has increased by 20-30 seconds. The bee case is fitted and the 3-leaf prop is not interfering Very satisfied and highly recommended

I use it for the Fatbee FB90, as the props delivered with the bee are very bad balanced and produce heavy vibrations and noise. These ones are better! But they are slightly too long for the bee, so I had to remove the canopy.

I use it for the Fatbee FB90, as the props delivered with the bee are very bad balanced and produce heavy vibrations and noise. These ones are better! But they are slightly too long for the bee, so I had to remove the canopy.

I use it for the Fatbee FB90, as the props delivered with the bee are very bad balanced and produce heavy vibrations and noise. These ones are better! But they are slightly too long for the bee, so I had to remove the canopy.

I've tried these props on my Eachine QX95. They are very quiet and the flight is nice and stable. They SLOW down my QX95 a lot, as you can see in this video https://www.youtube.com/watch?v=Ebufdnud-sw That is probably because these props are very small. I think they might be more recommended for tiny whoops. If you have a QX95 or similia and you are looking for speed, forget about these props. But if you are a newbie, just like me, and find it hard to control your QX95 in small places, I think you should definitely give them a try. PS: they have a tight hole, so you won't need to glue them to your 8520 motors. PPS: I haven't experienced any overheated motors problem, as someone has.

I've tried these props on my Eachine QX95. They are very quiet and the flight is nice and stable. They SLOW down my QX95 a lot, as you can see in this video https://www.youtube.com/watch?v=Ebufdnud-sw That is probably because these props are very small. I think they might be more recommended for tiny whoops. If you have a QX95 or similia and you are looking for speed, forget about these props. But if you are a newbie, just like me, and find it hard to control your QX95 in small places, I think you should definitely give them a try. PS: they have a tight hole, so you won't need to glue them to your 8520 motors. PPS: I haven't experienced any overheated motors problem, as someone has.

I've tried these props on my Eachine QX95. They are very quiet and the flight is nice and stable. They SLOW down my QX95 a lot, as you can see in this video https://www.youtube.com/watch?v=Ebufdnud-sw That is probably because these props are very small. I think they might be more recommended for tiny whoops. If you have a QX95 or similia and you are looking for speed, forget about these props. But if you are a newbie, just like me, and find it hard to control your QX95 in small places, I think you should definitely give them a try. PS: they have a tight hole, so you won't need to glue them to your 8520 motors. PPS: I haven't experienced any overheated motors problem, as someone has.

I took a QX70, shoved everything into a QX95 frame and now I have added these 3 blade props to FPV racer Build

I took a QX70, shoved everything into a QX95 frame and now I have added these 3 blade props to FPV racer Build

I took a QX70, shoved everything into a QX95 frame and now I have added these 3 blade props to FPV racer Build

The props make a good impression. But they are different to the description. The Diameter: 65mm they do not have. You see on the foto just 55mm. They are to small for my copter.

The props make a good impression. But they are different to the description. The Diameter: 65mm they do not have. You see on the foto just 55mm. They are to small for my copter.

The props make a good impression. But they are different to the description. The Diameter: 65mm they do not have. You see on the foto just 55mm. They are to small for my copter.

I like these props for using on micros 100mm or smaller, any bigger will be to much of a strain on them. I use them on my Bumble Bee90/King Kong 100mm Frame. I did not like the induct system on the bumble bee, the larger king kong frame and these 3 blade props made it a much better racer

I like these props for using on micros 100mm or smaller, any bigger will be to much of a strain on them. I use them on my Bumble Bee90/King Kong 100mm Frame. I did not like the induct system on the bumble bee, the larger king kong frame and these 3 blade props made it a much better racer

I like these props for using on micros 100mm or smaller, any bigger will be to much of a strain on them. I use them on my Bumble Bee90/King Kong 100mm Frame. I did not like the induct system on the bumble bee, the larger king kong frame and these 3 blade props made it a much better racer

Die Propeller sind kleiner als gedacht, allerdings auch strapazierfähiger als gedacht. Einflugtest steht noch aus, allerdings sind die Dinger so leicht, dass die Effizienz dadurch sehr gut sein muss!

Die Propeller sind kleiner als gedacht, allerdings auch strapazierfähiger als gedacht. Einflugtest steht noch aus, allerdings sind die Dinger so leicht, dass die Effizienz dadurch sehr gut sein muss!

Die Propeller sind kleiner als gedacht, allerdings auch strapazierfähiger als gedacht. Einflugtest steht noch aus, allerdings sind die Dinger so leicht, dass die Effizienz dadurch sehr gut sein muss!

Product delivered in perfect condition, well packed and according to the advertisement. Congratulations.

Product delivered in perfect condition, well packed and according to the advertisement. Congratulations.

Product delivered in perfect condition, well packed and according to the advertisement. Congratulations.