الشحن الى United Kingdom , USD
أعلى مراجعة إيجابية لـ %s على Banggood, تسوق أفضل %s بأقل سعر على Banggood. تصفح المراجعات الإيجابية الأكثر إفادة لـ %s قبل الشراء., ألعاب أرسي ، رياضة ممتعة ، أزياء ، إلكترونيات شعبية
tomaskavan 21/08/2019
It really works. If the printer is cooling down (after print), it takes more time to cool down the printing bed. So if you want to start new print, the bed is ready (heated up) sooner. I suppose that the printer also does not have to heat the bed so often so it should save some electricity... It sticks well (so try to stick it for the first attempt), the size/dimensions is/are accurate. Just one con - you have to take into account that it is 3mm thick, so if you are not using magnetic pad, you will probably have to use wider clips (or the current ones will be more stretched and could pop out). I also had to cut a small piece of pad in the corner where the cables (leading to bed heater) are connected (so the pad would hold/stick better). And the pad could be maybe a little bit cheaper (considering it is just a cork with sticker) :-). Overall I do not regret buying it!
0
تعليقات
عرض
قياس مدى الرضا

حمل التطبيق للحصول على كوبون خصم بقيمة 10% حصرياً