استعراضات العملاء

4.88 من 5
أكتب مراجعة
  • كل المراجعات (42)
  • صورة (2)
  • فيديو (0)
  • بداية الكل
    • بداية الكل(42)
    • 5 بدأ(38)
    • 4 بدأ(3)
    • 3 بدأ(1)
    • 2 بدأ(0)
    • 1 بدأ(0)
الترتيب حسب:
أفضل مراجعة
  • أفضل مراجعة
  • الأكثر أفاده
  • آخر
  • 2018-03-24 22:50:08

    I normally have trouble printing ABS, but so far all of my prints have stuck without issue to this scrub surface. I'm definitely happy with this purchase.

    تعليقات
  • 2018-10-08 01:06:42

    I use this product and it works very good. thank you

    تعليقات
  • 2020-04-10 11:14:45

    Va genial! Se adhiere sobre la cama caliente y no hace falta poner laca ni nada para que las piezas se adhieran. En cuanto tenga terminada de montar la otra impresora compraré otro sin duda.

    تعليقات
  • tjeno
    HU
    2020-04-16 00:23:12

    It is the best for Anet A8!

    تعليقات
  • 2019-10-19 01:16:01

    conforme a la commande

    تعليقات
  • petercb
    AT
    2019-08-20 14:37:01

    I made a mistake ordering this size - should have checked the printer first. BUT - I will use them on a smaller secondary platform, so these surface mats will come in handy. A very good product - tried them yesterday and the pieces stick and come off perfect. Just I don't know if I will need more as the last mat held up 2600 hours without any major flaws.

    تعليقات
  • Sawer
    CZ
    2018-06-25 03:22:23

    This thing is a little bit overboard. The print surface is great, does not leave marks on the surface, but for PETG at 60 degrees i get warping, at 70 degrees it stick so much, that by removing my 3rd print, part of the surface were removed with the part, so its destroyed after 3 prints. The amount of force needed to tear the printing surface with the part was supprizing low, would recommend making it thicker.

    تعليقات
  • blabla
    AT
    2018-05-14 01:27:03

    First of all, make sure that you receive an undamaged part, because mine got damaged during shipping (i cut out the damaged part since it luckily was on the side). I applied it cold directly onto my aluminium heatbed and it sticks very well. Use a credit card to push the air out. Just printed an e3d v6 fan mount with bq flament at 198C on the cold build surface and the print stuck very well but could also be removed with ease. I am happy with the product - although not so much with the shippind damage

    تعليقات
  • Tuxo_MX
    MX
    2018-08-31 09:46:41

    I bought this one because has some markings. Upon arrival it looks good, and has a porous texture, not sure how it will handle different printing materials. I will cut it and stick on 3mm glass and test it.

    تعليقات
  • post34
    TR
    2019-03-01 13:16:39

    im very pleaesed about the sticker good price . filament sticks well no more glue or bed problems

    تعليقات
Show:

    Go to page

    Go
    recommendation for you
    • US$3.29
    • US$26.85
    • US$72.95
    • US$7.87
    • US$71.52
    • US$11.49
    • US$17.99
    • US$7.89
    • US$31.49
    • US$2.57
    • US$89.99
    • US$31.55
    • US$45.42
    • US$3.70
    • US$17.99
    • US$83.99
    • US$1.33
    • US$10.44