حامل موصل بلوج XT60 XT90 من نوع CNC لركوب النماذج التحكم عن بعد
تمت ترجمة جزء من المراجعة تلقائيًا.
Для такого XT90 по висоті не підходить, є зазори, по ширині теж не підходить.
Fast delivery. Good procut.
تكون الساق أقصر قليلاً من سُمك الموصل قصر الشعور الجيد الرائع ليس قصيرًا بشكل واضح عند ربط البرغي قمت بتقليص النتوء الداخلي قليلاً وتركيب فاصل 1 مم (^-^)
buono ma fare attenzione che in giro ci sono xt60 con poco incavo per incastrarsi
Good quality for good price. Everything like in description.
Super Steckerhalterung für einen XT60 Stecker. Sehr gute Qualität. Top
Screws are 2.5M. An odd size which makes finding proper replacement screws difficult. Screws themselves have a 5mm long thread, which means that, when screwed onto a 4mm frame, there is only 1mm going into the threads of the mounting bracket. 2mm on a 3mm frame. It would have been MUCH better to provide 8mm or longer screws. Also, the standoffs of the bracket are a tad too short. The XT60 fits in between the standoffs perfectly but when the XT60 is in place the actual standoffs don't touch the frame anymore. The standoffs could use another 1/2 millimeter. So you have to sand down one side of the XT60 or use washers to make it fit flush with the frame.
لقد تأخرت. ما زالَ يَحتاجُ لإثْباته
It works well.
Super jakość i wykonanie. Doskonale trzyma wtyczkę. Polecam.